MAX6518UKP105+T Maxim Integrated Products, MAX6518UKP105+T Datasheet - Page 6

• Manufacturer Part Number: MAX6518UKP105+T
• Description: IC TEMP SENSOR SW SOT23-5
• Manufacturer: Maxim Integrated Products

Specifications of MAX6518UKP105+T

• Function: Temp Switch
• Topology: Comparator, Voltage Reference
• Sensor Type: Internal
• Sensing Temperature: 105°C Trip Point
• Output Type: Active High/Push-Pull
• Output Alarm: Yes
• Output Fan: Yes
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Temperature Threshold: + 105 C
• Full Temp Accuracy: +/- 3 C
• Gain: - 10.62 mV / C
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

In high-performance/high-reliability applications, multi-
ple temperature monitoring is important. The high-level
integration and low cost of the MAX6516 and MAX6518
facilitate the use of multiple temperature monitors to
increase system reliability. The application in Figure 3
uses two MAX6516s with different hot temperature
thresholds to ensure that fault conditions that can
overheat the monitored device cause no permanent
damage. The first temperature monitor activates the fan
when the die temperature exceeds +45°C. The second
MAX6516 triggers a system shutdown if the die
temperature reaches +75°C, preventing damage from
a wide variety of destructive fault conditions, including
latchups, short circuits, and cooling-system failures.
The MAX6516–MAX6519 temp sensor devices can be
tested after PC board assembly using OUT. Testing
can be used to verify proper assembly and functionality
of the temperature protection circuitry. Since OUT has
a weak drive capability, the voltage at OUT can be
forced to cause the digital outputs to change states,
thereby verifying that the internal comparators and out-
put circuitry function properly after assembly. Below is
a test procedure that can be used to test the
MAX6516–MAX6519:
• Power up the device, measure OUT, and observe the
Low-Cost, 2.7V to 5.5V, Analog Temperature
Sensor Switches in a SOT23
Figure 1. Temperature-Window Alarms Using the MAX6516
6
state of the logic output.
_______________________________________________________________________________________
5V
V
GND
HYST
V
GND
HYST
MAX6516UKN005
CC
MAX6516UKP075
CC
Low-Cost, Fail-Safe Temperature
TUNDER
TOVER
OUT
OUT
PC Board Testing
UNDERTEMP
OVERTEMP
OUT OF RANGE
Figure 2. Temperature Window Alarm Using the MAX6517
Figure 3. Low-Power, High-Reliability, Fail-Safe Temperature
Monitor
5V
GND
μP
MAX6517UKP075
GND
V
CC
HEAT
HEAT
HYST
TOVER
OUT
100kΩ
5V
V
V
HYST
CC
MAX6516UKP075
CC
MAX6516UKP045
TUNDER
GND
GND
MAX6517UKN005
GND
HYST
TOVER
TOVER
V
OUT
OUT
CC
OUT OF RANGE
HYST
FAN CONTROL
SHUTDOWN
OUT
SYSTEM