LDECB3100KA0N00 Kemet, LDECB3100KA0N00 Datasheet - Page 16

• Manufacturer Part Number: LDECB3100KA0N00
• Description: CAP FILM .1UF 50V SMD
• Manufacturer: Kemet
• Series: LDE Arcotronicsr

Specifications of LDECB3100KA0N00

• Capacitance: 0.1µF
• Voltage - Ac: 40V
• Voltage - Dc: 50V
• Dielectric Material: Polyethylene (PEN)
• Tolerance: ±10%
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 1210 (3225 Metric)
• Size / Dimension: 0.130" L x 0.098" W (3.30mm x 2.50mm)
• Height: 0.083" (2.10mm)
• Termination: Solder Pads
• Features: General Purpose
• Voltage Rating: 50 Volts
• Dissipation Factor Df: 0.8
• Operating Temperature Range: - 55 C to + 125 C
• Dimensions: 2.5 mm W x 3.2 mm L x 2.1 mm H
• Product: PEN SMD Film Capacitors
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Esr (equivalent Series Resistance): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 399-5476-2

Production process basic suggestions
Note: small fissures on the capacitor’s cutting surface are actually slight detachments of two adjacent metallized film
Therefore, small fissures on SMD Film Capacitors are not comparable to cracks on SMD Ceramics.
Fissures do not influence in anyway SMD Film Capacitors’ reliability.
07/2008
no solder joint on both
no solder joint on one
capacitance drop
capacitance drop
end terminations
capacitor’s body
end termination
layers and have to be considered only as an aesthetic issue related to the SMD Film Capacitors’ manufacturing
process and technology.
deformation
(up to 20%)
mechanical
In case of:
(over 20%)
not-uniform solder paste thickness on the
bad temperature distribution in the reflow
bad temperature distribution in the reflow
too long time within T
too long time within T
capacitor damaged by a soldering iron
capacitor damaged by a soldering iron
capacitor damaged by a soldering iron
wrong position of the capacitor on the
no solder paste on the landing areas
too high temperature ramp-up rate
too high temperature ramp rate
thermal profile parameters
thermal profile parameters
too long time over 217 ° C
oxidated end terminations
too long time over 217 °C
landing area dimensions
landing area dimensions
solder paste quality
solder paste quality
Typical cause
landing areas
landing areas
oven
oven
max
max
and T
and T
max
max
16
- 5 °C
- 5 °C
see manual soldering recommendations, page 15
see manual soldering recommendations, page 15
see manual soldering recommendations, page 15
set the dispensing solder paste machine properly
set the dispensing solder paste machine properly
check the reflow oven temperature distribution
check the reflow oven temperature distribution
see moisture recommendations, page 15
see landing areas suggestions, page 14
see landing areas suggestions, page 14
see solder paste suggestions, page 14
see solder paste suggestions, page 14
see reflow recommendations, page 14
see reflow recommendations, page 14
see reflow recommendations, page 14
see reflow recommendations, page 14
see reflow recommendations, page 14
see reflow recommendations, page 14
see reflow recommendations, page 14
see reflow recommendations, page 14
set the pick & place machine properly
Typical solution
and variations
and variations
SMD Film Capacitors