APS750 Tripp Lite, APS750 Datasheet - Page 2

• Manufacturer Part Number: APS750
• Description: INVERTER W/BATT CHARGE 750W 2 OT
• Manufacturer: Tripp Lite
• Series: PowerVerter® APSr
• Type: Inverter, UPSr

Specifications of APS750

• Rohs Status: Not applicable
• Voltage - Output: 120VAC
• Voltage - Input: 12VDC, 120VAC
• Ac Outlets: 2
• Connector - Ac Output: NEMA 5-15R
• Connector - Voltage Input: Terminals, Power Cord (NEMA 5-15P)
• Power - Output Continuous: 750W
• Power - Output Surge: 1500W
• Remote Capability: Yes
• Region Utilized: North America
• Size: 9.00" L x 8.75" W x 7.00" H (228.6mm x 222.3mm x 177.8mm)
• Features: Auto Power Transfer for UPS Mode, Battery Charger
• Weight: 17 lbs (7.7kg)
• Ac Output Connector: NEMA 5-15R
• Voltage - Input Connector: Terminals, NEMA 5-15P
• Configuration: Enclosed
• Mounting Type: Panel
• Number Of Outputs: 2
• Operation: Switching
• Output: 120 VAC @ 20 A, 12 VDC @ 20 A
• Power, Output: 750 W
• Primary Type: DC-AC Inverter
• Special Features: Remote On/Off
• Voltage, Input: 120/12 VAC/VDC
• Voltage, Output: 120, 12 VAC, VDC
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: TL103

Specifications
OVERVIEW
Intended Application
OUTPUT
Frequency
compatibility
Output watts
Continuous output
capacity (watts)
Peak output capacity
(watts)
Output nominal
voltage
Output voltage
regulation
Output frequency
regulation
Overload protection
Outlet quantity / type
INPUT
Recommended
Electrical Service
Maximum input
amps / watts
Input connection type
Voltage compatibility
(VAC)
750 watts continuous AC output in inverter mode, 1500 watts continuous AC output in AC mode
Double Boost™ inverter output supports momentary start-up loads up to 200% of the continuous rating for up to 10 seconds
OverPower™ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions.
(For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full
nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)
3 stage, 20 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
Two built-in NEMA 5-15R output receptacles pass 120V line power or inverter output through to connected equipment
Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals
Moisture-resistant construction enables vehicular or marine operation in high humidity environments
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to
maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings.
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dip-switches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during
overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts
Resettable 6A charger AC input breaker and resettable 8A AC output breaker and automatic 2 speed cooling fan protect the inverter from
load and temperature related failures
Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory
also includes user configurable jacks to support inverter shutoff or start-up as a vehicle ignition is engaged.
Emergency Home Power
60 Hz
750
750
1500
120V
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
60 Hz (+/- 0.3 Hz)
Includes 6A AC input breaker dedicated to the charging system and 8A output breaker for AC output loads
2 AC outlets
DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full
continuous capacity - DC requirements increase during Over-Power and Double-Boost operation). AC INPUT: 15A
120V AC recommended
DC INPUT: Full continuous load - 72A at 12V DC. AC INPUT: 8 amps at 120VAC with full inverter and charger load
(4.2A max charger-only)
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug
120