DMC-16205NY-LY-BGN Optrex America Inc, DMC-16205NY-LY-BGN Datasheet - Page 15

• Manufacturer Part Number: DMC-16205NY-LY-BGN
• Description: LCD MODULE 16X2 CHARACTER
• Manufacturer: Optrex America Inc
• Series: DMC-16205r

Specifications of DMC-16205NY-LY-BGN

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Transmissive
• Number Of Digits/alpha: 32
• Outline L X W X H: 88.00mm x 34.00mm x 16.10mm
• Viewing Area: 59.50mm L x 16.00mm W
• Backlight: LED - Yellow
• Display Format: 16 x 2
• Character Size: 5.55mm H x 2.95mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 5.0V
• Dot Size: 0.55mm W x 0.65mm H
• Operating Temperature: 0°C ~ 50°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 73-1287

10.Handling Precautions
Optrex Products are designed for use in ordinary electronic devices such as business machines,
telecommunications equipment, measurement devices and etc..
Optrex Products are not designed, intended, or authorized for use in any application in which the failure of
the product could result in a situation where personal injury or death may occur. These applications
include, but are not limited to, life-sustaining equipment, nuclear control devices, aerospace equipment,
devices related to hazardous or flammable materials, etc. (If Buyer intends to purchase or use the Optrex
Products for such unintended or unauthorized applications, Buyer must secure prior written consent to
such use by a responsible officer of Optrex Corporation.) Should Buyer purchase or use Optrex Products
for any such unintended or unauthorized application (without such consent), Buyer shall indemnify and
hold Optrex and its officers, employees, subsidiaries, affiliates and distributors harmless against all claims,
costs, damages and expenses, and reasonable attorney's fees, arising out of, directly or indirectly, any
claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that Optrex was negligent regarding the design or manufacture of the part.
1) LCD may be broken because it is made of glass.
2) Polarizer is a soft material and can easily be scratched.
3) Please avoid static electricity.
4) If it is necessary to store LCD modules for a long time, please comply with the following procedures.
5) The module does not contain excess current limiter.
6) Liquid crystal may be leaked when display is broken. Never taste it. If your hands or clothes touch it,
7) The connection between the bezel and V
Optrex shall not be responsible for any infringement of industrial property rights of third parties in any
country arising out of the application or use of Optrex Products, except which directly concern the
structure or production of such products.
① Please be sure to ground human body and electric appliances during work.
② It is preferable to use conductive mat on table and wear cotton clothes or conduction processed fiber.
③ Please slowly peel off protective film, because static electricity may be charged.
① Store as delivered by Optrex
② If you store as unpacked, put in anti-static bag, seal its opening and store where it is not subjected to
③ Store at temperature 0 to +35℃ and at low humidity. Please refer to our specification sheets for
DMC16205NY-LY (AB) No.98-0065
If storage condition is not satisfactory, display (especially polarizer) may be deteriorated or soldering
I/O terminals may become difficult (some oxide is generated at I/O terminals plating).
Please design the limiter to cut excess current in your power supply circuit.
please immediately wash using soap.
(Some module do not maintain connection between them.)
Please consult OPTREX to specify the connection.
Synthetic fiber is not recommended.
direct sunshine nor fluorescent lamp.
storage temperature range and humidity condition.
SS
(GND) is not specified in the module.
OPTREX
OPTREX CORPORATION
Page 15/15