DMC-40218NY-EB Optrex America Inc, DMC-40218NY-EB Datasheet - Page 16

• Manufacturer Part Number: DMC-40218NY-EB
• Description: LCD MODULE 40X2 CHARACTER
• Manufacturer: Optrex America Inc
• Series: DMC-40218r

Specifications of DMC-40218NY-EB

• Display Type: STN - Super-Twisted Nematic
• Display Mode: Transmissive
• Number Of Digits/alpha: 80
• Outline L X W X H: 182.00mm x 33.50mm x 11.00mm
• Viewing Area: 152.50mm L x 16.50mm W
• Backlight: EL - Blue/Green
• Display Format: 40 x 2
• Character Size: 5.55mm H x 3.20mm W
• Character Format: 5 x 8 Dots
• Voltage - Supply: 5.0V
• Dot Size: 0.60mm W x 0.65mm H
• Interface: Parallel
• Operating Temperature: 0°C ~ 50°C
• Other names: 73-1077; OP240NYEB

This product has been manufactured to your company’s specifications as a part for use in your company’s
general electronic products. It is guaranteed to perform according to delivery specifications. For any other
use apart from general electronic equipment, we cannot take responsibility if the product is used in medical
devices, nuclear power control equipment, aerospace equipment, fire and security systems, or any other
applications in which there is a direct risk to human life and where extremely high levels of reliability are
required. If the product is to be used in any of the above applications, we will need to enter into a separate
product liability agreement.
DMC40218NY-EB* (CV) No.2000-0157
8) For models which use touch panels:
9) For models which use COG,TAB,or COF:
10) Models which use flexible cable, heat seal, or TAB:
11.Warranty
① Do not stack up modules since they can be damaged by components on neighboring modules.
② Do not place heavy objects on top of the product. This could cause glass breakage.
① The mechanical strength of the product is low since the IC chip faces out unprotected from the rear.
② Given the fact that the rear of the IC chip is left exposed, in order to protect the unit from electrical
① In order to maintain reliability, do not touch or hold by the connector area.
② Avoid any bending, pulling, or other excessive force, which can result in broken connections.
① We cannot accept responsibility for any defect, which may arise from additional manufacturing of
② We cannot accept responsibility for any defect, which may arise after the application of strong
③ We cannot accept responsibility for any defect, which may arise due to the application of static
④ When the product is in CFL models, CFL service life and brightness will vary according to the
⑤ We cannot accept responsibility for intellectual property of a third party, which may arise through the
⑥ Optrex will not be held responsible for any quality guarantee issue for defect products judged as
damage, avoid installation configurations in which the rear of the IC chip runs the risk of making
Be sure to protect the rear of the IC chip from external forces.
the product (including disassembly and reassembly), after product delivery.
electricity after the product has passed your company’s acceptance inspection procedures.
performance, reliability, or defect, which may arise.
external force to the product.
any electrical contact.
performance of the inverter used, leaks, etc. We cannot accept responsibility for product
application of our product to your assembly with exception to those issues relating directly to the
structure or method of manufacturing of our product.
Optrex-origin longer than 2 (two) years from Optrex production or 1(one) year from Optrex, Optrex
America, Optrex Europe, Display LC delivery which ever comes later.
OPTREX
OPTREX CORPORATION
Page 16/16