NHD-320240WG-COTFH-VZ#-010-80 Newhaven Display, NHD-320240WG-COTFH-VZ#-010-80 Datasheet - Page 11

• Manufacturer Part Number: NHD-320240WG-COTFH-VZ#-010-80
• Description: LCD MOD GRAPHIC 320X240 TRANSFL
• Manufacturer: Newhaven Display

Specifications of NHD-320240WG-COTFH-VZ#-010-80

• Display Type: FSTN - Film Super-Twisted Nematic
• Display Mode: Transflective
• Viewing Area: 120.14mm L x 92.14mm W
• Backlight: LED - White
• Dot Size: 0.34mm W x 0.34mm H
• Dot Pitch: 0.36mm x 0.36mm
• Dot Pixels: 320 x 240 (QVGA)
• Interface: Parallel
• Pixel Density: 320 x 240
• Fluid Type: FSTN Positive
• Module Size (w X H X T): 154.7 mm x 120.2 mm x 15.6 mm
• Backlighting: LED White
• Operating Temperature Range: - 20 C to + 70 C
• Product: Graphic LCD Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

10.RELIABILITY
Content of Reliability Test (wide temperature, -20
Note1: No dew condensation to be observed.
Note2: The function test shall be conducted after 4 hours storage at the normal
Note3: Vibration test will be conducted to the product itself without putting it in a container.
High Temperature storage
Low Temperature
storage
High Temperature
Operation
Low Temperature
Operation
High Temperature/
Humidity Operation
Thermal shock resistance
Vibration test
Static electricity test
Test Item
Temperature and humidity after remove from the test chamber.
Endurance test applying the high storage temperature for a long
time.
Endurance test applying the high storage temperature for a long
time.
Endurance test applying the electric stress (Voltage & Current)
and the thermal stress to the element for a long time.
Endurance test applying the electric stress under low temperature
for a long time.
The module should be allowed to stand at 60℃,90%RH max
For 96hrs under no-load condition excluding the polarizer,
Then taking it out and drying it at normal temperature.
The sample should be allowed stand the following 10 cycles of
operation
Endurance test applying the vibration during transportation and
using.
Endurance test applying the electric stress to the terminal.
-20℃
30min
Environmental Test
Content of Test
1 cycle
5min
第 11 頁，共 20 頁
25℃
30min
70℃
℃
~70℃)
80℃
200hrs
-30℃
200hrs
70℃
200hrs
-20℃
200hrs
60℃,90%RH
96hrs
-20℃/70℃
10 cycles
Total fixed amplitude :
Vibration Frequency :
One cycle 60 seconds to 3
directions of X,Y,Z for
Each 15 minutes
VS=800V,RS=1.5kΩ
CS=100pF
1 time
15mm
10~55Hz
Test Condition
Note
——
——
——
1,2
1,2
2
1
3