NHD-2.4-240320ZF-CTXI#-T-1 Newhaven Display, NHD-2.4-240320ZF-CTXI#-T-1 Datasheet - Page 22

• Manufacturer Part Number: NHD-2.4-240320ZF-CTXI#-T-1
• Description: LCD DISP TFT 2.4" 240X320
• Manufacturer: Newhaven Display

Specifications of NHD-2.4-240320ZF-CTXI#-T-1

• Display Type: TFT - Color LCD
• Display Mode: Transmissive
• Viewing Area: 36.72mm L x 48.96mm W
• Backlight: LED - White
• Dot Pitch: 0.05mm x 0.15mm
• Dot Pixels: 240 x 320
• Interface: Digital
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Dot Size: -
• Lead Free Status / Rohs Status: Details

18-5 STORAGE
18-6 SAFETY
18-7 LIMITED WARRANTY
18-8 RETURN LCM UNDER WARRANTY
STANDARD
DOC.
(1) Store them in a sealed polyethylene bag. If properly sealed, there is no need for dessicant.
(2) Store them in a dark place. Do not expose to sunlight or fluorescent light, keep the temperature between 0 C and 35 C.
3) The polarizer surface should not come in contact with any other objects. (We advise you to store them in the container in
(4) Environmental conditions :
(1) It is recommended to crush damaged or unnecessary LCDs into pieces and wash them off with solvents such as acetone
(2) If any liquid leakes out of a damaged glass cell and comes in contact with the hands, wash off thoroughly with soap and
When storing LCDs as spares for some years, the following precaution are necessary.
which they were shipped.)
water.
found to be functionally defective when inspected in accordance with Newhaven LCD acceptance standards (copies
available upon request) for a period of one year from date of shipments. Cosmetic/visual defects must be returned to
Newhaven within 90 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability
of Newhaven limited to repair and/or replacement on the terms set forth above. Newhaven will not be responsible for any
subsequent or consequential events.
description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without
damaging the PCB’s eyelet, conductors and terminals.
No warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are :
Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient
and ethanol, which should later be burned.
Unless agreed between Newhaven and customer, Newhaven will replace or repair any of its LCD modules which are
- Do not leave them for more than 160hrs. at 70 C.
- Should not be left for more than 48hrs. at -20 C.
- Broken LCD glass.
- Circuit modified in any way, including addition of components.
PRODUCT
SPEC.
MODULE
NO.
PAGE
21