GLK12232-25-WBL-E Matrix Orbital, GLK12232-25-WBL-E Datasheet - Page 7

• Manufacturer Part Number: GLK12232-25-WBL-E
• Description: LCD GRAPHIC DISPL 122X32 WHT BLU
• Manufacturer: Matrix Orbital

Specifications of GLK12232-25-WBL-E

• Display Type: LCD - Color
• Display Mode: Transmissive
• Viewing Area: 76.00mm L x 25.20mm W
• Backlight: LED - White
• Dot Size: 0.52mm W x 0.62mm H
• Dot Pitch: 0.53mm x 0.53mm
• Dot Pixels: 122 x 32
• Interface: I²C, RS232, TTL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.6 Trying Out the GLK12232-25-WBL
If characters are typed on the keyboard, they should now appear on the display screen. Please note that CR,
backspace, etc., won’t have any effect. Text will wrap around to the next line when the end of a line has been
reached.
1.7 Trying out a Keypad
unpredictable. At this point all we need to do is make sure that the keypad and interface work, and possibly
generate an ASCII map for any programming needs.
default, a keypress is transmitted as serial data immediately. Keypad buffering can be selected using the
appropriate commands.
1.7.1 Here’s what to do:
Matrix Orbital
1. Refer to the Figure above for the following steps.
2. Wire the connector to the power supply. On most connectors the RED lead will go to +5V and the
3. Connect the display to the PC using the serial cable and adapter if required.
4. Connect the power connector, making sure that the +5V goes to V+ as shown in the diagram.
5. Turn on the power: the LCD backlight should come on.
1. Use the mogd.exe program to exercise some of the features of the display to ensure everything works
2. To experiment with typing text, run a PC terminal program, such as Hyperterm. Make sure it’s con-
1. The PC should be running a terminal program such as Hyperterm.
2. With the display connected to the PC, plug in the keypad. If the connector has fewer pins than the one
The unit should be connected to power and the PC and backlight should be on.
Since a number of different keypad types can be connected to the display, the results may be a little
The keypad interface on the display converts a row / column connection to an ASCII character. By
BLACK lead to GND.
properly.
figured to use the correct port. Set the baud rate to 19,200.
on the display, center it as well as possible.
NOTE The Manufacturer’s Warranty becomes void if the unit is subjected to over-voltage
or reversed polarity.
GLK12232-25-WBL
3