HFBR-5701LP Avago Technologies US Inc., HFBR-5701LP Datasheet - Page 4

• Manufacturer Part Number: HFBR-5701LP
• Description: TXRX MMF SFP GBE/FC BAIL DELATCH
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-5701LP

• Data Rate: 1.25Gbd
• Wavelength: 850nm
• Applications: Ethernet
• Voltage - Supply: 3.135 V ~ 3.465 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Function: Transceiver for GbE and Fibre Channel
• Product: Transceiver
• Maximum Rise Time: 220 ps, 300 ps
• Maximum Fall Time: 220 ps, 300 ps
• Pulse Width Distortion: 0.252 ns, 0.266 ns
• Maximum Output Current: 150 mA
• Operating Supply Voltage: 3.135 V to 3.465 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Package / Case: SFP-20
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Application Support
Evaluation Kit
To assist in the transceiver evaluation process, Avago
offers a 1.25 Gbd Gigabit Ethernet evaluation board which
facilitates testing of the HFBR-5701L. It can be obtained
through the Avago Field Organization by referencing
Avago part number HFBR-0571.
Reference Designs
A Reference Design including the HFBR-5701L and the
HDMP-1687 GigaBit Quad SerDes is available. It may be
obtained through the Avago Field Sales organization.
Regulatory Compliance
See Table 1 for transceiver Regulatory Compliance. Certi-
fication level is dependent on the overall configuration
of the host equipment. The transceiver performance is
offered as a figure of merit to assist the designer.
Electrostatic Discharge (ESD)
There are two design cases in which immunity to ESD
damage is important.
The first case is during handling of the transceiver prior to
insertion into the transceiver port. To protect the transceiv-
er, it’s important to use normal ESD handling precautions.
These precautions include using grounded wrist straps,
work benches, and floor mats in ESD controlled areas.
The ESD sensitivity of the HFBR-5701L is compatible with
typical industry production environments.
The second case to consider is static discharges to the
exterior of the host equipment chassis after installation.
To the extent that the optical interface is exposed to the
outside of the host equipment chassis, it may be subject
to system-level ESD requirements.
Immunity
The ESD performance of the HFBR-5701L exceeds typical
industry standards.
Equipment hosting HFBR-5701L modules will be subjected
to radio-frequency electromagnetic fields in some environ-
ments. The transceiver has good immunity to such fields
due to its shielded design.
4
Electromagnetic Interference (EMI)
Equipment incorporating Gigabit Ethernet transceivers is
typically required to meet the requirements of the FCC in
the United States, CENELEC EN55022 (CISPR 22) in Europe,
and VCCI in Japan.
The metal housing and shielded design of the HFBR-5701L
minimize the EMI challenge facing the host equipment
designer.
Flammability
The HFBR-5701L transceiver is made of metal and high
strength, heat resistant, chemically resistant, and UL 94V-0
flame retardant plastic.
Caution
There are no user serviceable parts nor any maintenance
required for the HFBR-5701L. All adjustments are made at
the factory before shipment to our customers. Tampering
with, modifying, misusing or improperly handling the
HFBR-5701L will void the product warranty. It may also
result in improper operation of the HFBR-5701L circuitry,
and possible overstress of the laser source. Device deg-
radation or Product failure may result. Connection of the
HFBR-5701L to a non-Gigabit Ethernet-compliant optical
source, operating above the recommended absolute
maximum conditions or operating the HFBR-5701L in a
manner inconsistent with its design and function may
result in hazardous radiation exposure and may be consid-
ered an act of modifying or manufacturing a laser product.
The person(s) performing such an act is required by law
to re-certify and re-identify the laser product under the
provisions of U.S. 21 CFR (Subchapter J).