ASMT-QTB0-0AA02 Avago Technologies US Inc., ASMT-QTB0-0AA02 Datasheet - Page 10

• Manufacturer Part Number: ASMT-QTB0-0AA02
• Description: LED RD/GN/BL 0.5W 4-PLCC
• Manufacturer: Avago Technologies US Inc.

Specifications of ASMT-QTB0-0AA02

• Viewing Angle: 120°
• Package / Case: 4-PLCC
• Color: Red, Green, Blue (RGB)
• Millicandela Rating: 620mcd Red, 1200mcd Green, 280mcd Blue
• Current - Test: 20mA
• Wavelength - Dominant: 621nm, 528nm, 470nm
• Wavelength - Peak: 629nm, 521nm, 465nm
• Voltage - Forward (vf) Typ: 2.1V Red, 3.2V Green, 3.2V Blue
• Lens Type: Clear
• Lens Style/size: Round, 2.9mm
• Size / Dimension: 3.40mm L x 3.20mm W
• Height: 2.00mm
• Mounting Type: Surface Mount
• Resistance Tolerance: 621nm, 528nm, 470nm
• Illumination Color: Red, Green, Blue
• Wavelength/color Temperature: 621 nm, 528 nm, 470 nm
• Power Rating: 0.5 W
• Operating Voltage: 2.1 V, 3.2 V, 3.2 V
• Operating Current: 20 mA
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 110 C
• Led Size: 2.9 mm
• Lens Appearance: Clear
• Lens Shape: Flat Round
• Number Of Leds: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Luminous Flux @ Current - Test: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 516-2133-2

Handling Precaution
The encapsulation material of the product is made of
silicone for better reliability of the product. As silicone is
a soft material, please do not press on the silicone or poke
a sharp object onto the silicone. These might damage the
product and cause premature failure. During assembly of
handling, the unit should be held on the body only. Please
refer to Avago Application Note AN 5288 for detail infor-
mation.
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the reli-
ability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount
Devices for details.
A. Storage before use
x Unopen moisture barrier bag (MBB) can be stored at
x
For product information and a complete list of distributors, please go to our web site:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved.
AV02-1033EN - April 15, 2010
<40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking
is not required, then it is safe to reflow the LEDs per the
original MSL rating.
assembly (e.g. for IQC).
It is not recommended to open the MBB prior to
www.avagotech.com
B. Control after opening the MBB
x The humidity indicator card (HIC) shall be read
x The LEDs must be kept at <30°C / 60%RH at all time
C. Control for unfinished reel
x For any unuse LEDs, they need to be stored in sealed
D. Control of assembled boards
x If the PCB soldered with the LEDs is to be subjected
E. Baking is required if:
x The HIC indicator is not GREEN at 10% and is AZURE at
x The LEDs are exposed to condition of >30°C / 60% RH
x The Led floor life exceeded 672hrs.
Recommended baking condition: 60±5ºC for 20hrs
immediately upon opening of MBB.
and all high temperature related process including
soldering, curing or rework need to be completed
within 672 hours.
MBB with desiccant or desiccator at <5%RH.
to other high temperature processes, the PCB need to
be stored in sealed MBB with desiccant or desiccator
at <5%RH to ensure no LEDs have exceeded their floor
life of 672 hours
5%
at any time.