CAP 2200PF 50V FILM 5% 0805

FCP0805H222J-J1

Manufacturer Part NumberFCP0805H222J-J1
DescriptionCAP 2200PF 50V FILM 5% 0805
ManufacturerCornell Dubilier Electronics (CDE)
SeriesFCP
FCP0805H222J-J1 datasheet
 

Specifications of FCP0805H222J-J1

Capacitance2200pFTolerance±5%
Package / Case0805 (2012 Metric)Voltage - Dc50V
Dielectric MaterialPolyphenylene Sulphide (PPS)Operating Temperature-55°C ~ 125°C
Mounting TypeSurface MountSize / Dimension0.079" L x 0.049" W (2.00mm x 1.25mm)
Height0.035" (0.89mm)TerminationSolder Pads
FeaturesGeneral PurposeVoltage Rating50 Volts
Dissipation Factor Df0.6Operating Temperature Range- 55 C to + 125 C
Dimensions1.25 mm W x 2 mm L x 0.9 mm HProductSMD Film Chip Capacitors - Various
Termination StyleSMD/SMTLead Free Status / RoHS StatusLead free / RoHS Compliant
Lead Spacing-Esr (equivalent Series Resistance)-
Voltage - Ac-  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
Page 1/7

Download datasheet (498Kb)Embed
Next
Type FCP Surface Mount Film Capacitors
Stable Stacked Metallized Film (PPS) Chips for Refl ow Soldering
Type FCP stacked metallized polyphenelene sulfide (PPS)
fi lm capacitors off er high capacitance per unit volume, stable
capacitance and DF over a wide temperature range, and
excellent high frequency performance. Type FCP capacitors
conform to standard EIA 0603, 0805, 1206, 1210, 1913 & 2416
surface mount case sizes and are packaged on tape and reel.
Specifi cations
Capacitance Range
Capacitance Tolerance
Rated Voltage
Dissipation Factor (Tan δ)
Operating Temperature Range
Dielectric Strength
Insulation Resistance
Construction
Life Test
Resistance to Soldering Heat
Moisture Resistance
Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
The Type FCP’s combination of high capacitance density and
excellent high frequency response makes it a great choice for
wireless and instrumentation applications.
Highlights
- Stacked metallized polyphenylene sulfi de (PPS) fi lm.
- High operating temperature to +125 ºC
- High capacitance per unit volume
- Excellent high frequency performance
- Typical ΔC from –55 ºC to 105 ºC
- Stable cap and DF over wide temperature range
100 pF to 0.22 µF (1kHz at ≤5 Vrms)
±5% (J) Standard, ±2% (G) Optional
16 Vdc and 50 Vdc
0.6% Max. (1 kHz at ≤5 Vrms)
–55 ºC to +125 ºC (See Voltage derating chart for 0.12 - 0.22 µF
above 105 ºC)
150% of rated Vdc for 60 s
3000 MΩ Min. at 20 ºC, after 60 s (16 Vdc rated, test 10 Vdc; 50 Vdc
rated, test 50 Vdc)
Stacked metallized polyphenylene sulfi de (PPS) fi lm. Terminations
are lead free with a Sn-Ag-Cu solder fi nish.
Capacitors subjected to 1000 hours of maximum rated tempera-
ture and 125% of the rated voltage will not have any signifi cant
visual damage, thecapacitance will be within ±2% of the initial
measured value, DF will be a maximum of 0.66%, and IR will be a
minimum of 1000 Megohms.
Capacitors subjected to a maximum of 260 °C refl ow soldering
process will not have any signifi cant visual damage, the dielectric
strength will be as specifi ed, the capacitance will be within ±3% of
the initial measured value, DF will be a maximum of .66%, and IR
will be a minimum of 1000 Megohms.
Capacitors subjected to 1000 h at 40 °C and 90% to 95% RH and
rated voltage will not have any signifi cant visual damage, will
withstand 1.3 times the rated voltage for one minute, the capaci-
tance will be within ±2% of the initial measured value, DF will be a
maximum of 0.9%, and IR will be a minimum of 1000 Megohms.
RoHS Compliant
≤ ±1.5%

FCP0805H222J-J1 Summary of contents

  • Page 1

    ... Type FCP Surface Mount Film Capacitors Stable Stacked Metallized Film (PPS) Chips for Refl ow Soldering Type FCP stacked metallized polyphenelene sulfide (PPS) fi lm capacitors off er high capacitance per unit volume, stable capacitance and DF over a wide temperature range, and excellent high frequency performance. Type FCP capacitors conform to standard EIA 0603, 0805, 1206, 1210, 1913 & ...

  • Page 2

    ... Case Part Number Code FCP0805H101J-J1 FCP0805H121J-J1 FCP0805H151J-J1 FCP0805H181J-J1 FCP0805H221J-J1 FCP0805H271J-J1 FCP0805H331J-J1 FCP0805H391J-J1 FCP0805H471J-J1 0805 FCP0805H561J-J1 FCP0805H681J-J1 FCP0805H821J-J1 FCP0805H102J-J1 FCP0805H122J-J1 FCP0805H152J-J1 FCP0805H182J-J1 FCP0805H222J-J1 FCP0805H272J-J1 FCP1206H332J-H1 FCP1206H392J-H1 FCP1206H472J-H1 FCP1206H562J-H1 1206 FCP1206H682J-H1 FCP1206H822J-H2 FCP1206H103J-H2 FCP1210H123J-G1 FCP1210H153J-G1 FCP1210H183J-G2 FCP1210H223J-G2 1210 FCP1210H273J-G2 FCP1210H333J-G3 FCP1210H393J-G3 FCP1913H473J-E1 FCP1913H563J-E1 ...

  • Page 3

    ... Type FCP Surface Mount Film Capacitors Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering Typical Temperature Characteristics Insulation Resistance 1000 100 10 1 -60 -40 - Temperature (°C) Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com ...

  • Page 4

    ... Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering Outline Dimensions Outline Dimensions (in.) Case Code L ±0.008 W 0603 0.063 0.032±0.006 0805 0.079 0.049±0.008 1206 0.126 0.063±0.008 1210 0.126 0.098±0.008 1913 0.189 0.130±0.012 2416 0.236 0.161±0.012 10000 ...

  • Page 5

    ... Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering FCP 0805 50 Vdc Rating Vrms and Arms vs. Frequency 100 100 pF to 2700 100 Frequency (kHz) FCP 1206 50 Vdc Rating Vrms and Arms vs. Frequency 100 3300 pF to 0.010 100 Frequency (kHz) Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com ...

  • Page 6

    ... Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering FCP 1210 50 Vdc Rating Vrms and Arms vs. Frequency 100 10 10 100 Frequency (kHz) FCP 1913 & 2416 50 Vdc Rating Vrms and Arms vs. Frequency 100 Vrms 30Vrms 10 10 Frequency (kHz) 100 11 Vrms Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com 1 ...

  • Page 7

    ... Stable Stacked Metallized Film (PPS) Chips for Reflow Soldering Typical Applications In PLL circuit applications, FCP SMT film capacitor advantages are tight tolerance on the capacitance value, stable capacitance with temperature, faster lock-up times, and no noise due to piezoelectric effects. Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com ...