BXRA-N0402-00000 Bridgelux, BXRA-N0402-00000 Datasheet - Page 39

• Manufacturer Part Number: BXRA-N0402-00000
• Description: LED ARRAY NEUTRAL WHITE 440LM
• Manufacturer: Bridgelux
• Series: ESr
• Type: Starboardr

Specifications of BXRA-N0402-00000

• Color: White, Neutral
• Luminous Flux @ Current - Test: 440 lm
• Current - Test: 600mA
• Current - Max: 1.5A
• Driver Circuitry: No
• Voltage: 8.9V
• Wavelength: 4100K
• Configuration: Single
• With Connector: No
• Voltage - Input: 8.9V
• Led Color: Neutral White
• Luminous Flux @ Test: 440lm
• Cct: 4750K
• Forward Current @ Test: 600mA
• Forward Current If Max: 1.5A
• Forward Voltage @ Test: 8.9V
• Viewing Angle: 120°
• Led Mounting: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Power - Input: -
• Other names: 976-1013

Mechanical Assembly and Handling
Recommended assembly is illustrated below.
When handling parts, please avoid contacting and do not apply stress to the resin area (see Figures 1
and 2, resin area is indicated in yellow).
Product should be firmly secured onto appropriate heat sink by fastening M2.5 or #4 screws on both sides
of the product as illustrated in Figure 41. The recommended center-to-center spacing for these the two
tapped holes for mounting screws is 19.20 ± 0.05mm for hexagonal star products and 26.92 ± 0.10mm for
rectangular array products. Bridgelux recommends the use of hard non-electrically conductive flat
washers with lock washers. Refer to Application Note AN11 – Handling and Assembly of Bridgelux LED
Arrays, for more details.
A thin layer of thermal grease should be applied to the bottom surface of the LED Array, between the
bottom of the array and the heat sink. All air gaps and voids between the heat sink and array should be
eliminated. Ensure that sufficient thermal grease is used to cover the entire bottom surface of the array,
but not so much that the thermal grease creeps up to the top of the array.
For the hexagonal star products, preferred screw mounting locations are indicated in Figure 42.
Bridgelux ES Array Series Product Data Sheet DS11 (03/14/11)
Figure 41: Recommended Assembly Method
Figure 42: Recommended Mounting
Locations for Hexagonal Star Products
Drawing Not to Scale
Page 39 of 45