FT63EP104 Copal Electronics Inc, FT63EP104 Datasheet - Page 7

• Manufacturer Part Number: FT63EP104
• Description: POT 100K OHM SINGLE CERMET TOP
• Manufacturer: Copal Electronics Inc
• Series: FT-63r

Specifications of FT63EP104

• Resistance (ohms): 100K
• Power (watts): 0.5W, 1/2W
• Taper: Linear
• Tolerance: ±10%
• Temperature Coefficient: ±100ppm/°C
• Number Of Turns: Single
• Adjustment Type: Top Adjustment
• Mounting Type: Through Hole
• Resistive Material: Cermet
• Package / Case: Square - 0.276" L x 0.276" W x 0.228" H (7.00mm x 7.00mm x 5.80mm)
• Resistance In Ohms: 100K
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FT-63EP104

■
<Taping packaging specifications>
<Bulk pack specifications>
Ammo Pack
■ Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
Taping version is packaged in 1000 pcs. per reel.
Orders will be accepted for units of 1000 pcs., i.e., 1000, 2000, 3000 pcs., etc.
Tape & reel version contains 1000 pcs. in one box.
Unit of bulk pack in a plastic bag is 100 pcs. per pack.
Boxing of bulk in a plastic bag is performed with 1000 pcs. per box.
Package size: 330 mm
The leader and end of the tape have an empty part of minimum 300 mm respectively.
There are two tape outlets on the package for different terminal alignment directions, for which details
Gross weight of the boxing version
refer to the sketch above.
(e.g.) When the tape is fed from the right outlet marked 3, #3 terminal comes out first.
PACKAGING SPECIFICATIONS
330 mm
ETV : Approx. 850 g
ETH : Approx. 940 g
ETP : Approx. 820 g
ETS : Approx. 940 g
45 mm
Ammo pack type
#1 terminal
Direction of feed
COPAL ELECTRONICS
CERMET TRIMMERS
Direction of feed
#3 terminal
FT-63