NME2415SC Murata Power Solutions Inc, NME2415SC Datasheet - Page 4

• Manufacturer Part Number: NME2415SC
• Description: CONV DC/DC 1W 24VIN 15V SIP SGL
• Manufacturer: Murata Power Solutions Inc
• Series: NMEr
• Type: Isolatedr

Specifications of NME2415SC

• Number Of Outputs: 1
• Output: 15V
• Power (watts): 1W
• Mounting Type: Through Hole
• Voltage - Input: 21.6 ~ 26.4V
• Package / Case: 4-SIP Module
• 1st Output: 15 VDC @ 66mA
• Size / Dimension: 0.45" L x 0.24" W x 0.39" H (11.4mm x 6.1mm x 9.9mm)
• Power (watts) - Rated: 1W
• Operating Temperature: 0°C ~ 70°C
• Efficiency: 80%
• Approvals: UL
• Output Power: 1 W
• Input Voltage Range: 21.6 V to 26.4 V
• Input Voltage (nominal): 24 V
• Output Voltage (channel 1): 15 V
• Output Current (channel 1): 66 mA
• Isolation Voltage: 1 KV
• Package / Case Size: SIP-4
• Output Voltage: 15 V
• Product: Isolated
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 811-1494-5

Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A.
Tel: [phone] [phone] Fax: [phone]
www.murata-ps.com email: [e-mail] ISO 9001 & ISO 14001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without
notice.
PACKAGE SPECIFICATIONS (continued)
www.murata-ps.com
RoHS COMPLIANCE INFORMATION
Unless otherwise stated all dimensions in inches (mm) ±0.5mm.
Tube length (8 Pin DIP) : 20.47 (520mm ±2mm).
Tube length (4 Pin SIP) : 20.47 (520mm ±2mm).
RECOMMENDED FOOTPRINT DETAILS
TUBE OUTLINE DIMENSIONS
8 Pin DIP Tube
8 Pin DIP Package
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish
on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types
in this series are backward compatible with Sn/Pb soldering systems.
For further information, please visit www.murata-ps.com/rohs
© 2008 Murata Power Solutions, Inc.
USA:
Canada:
UK:
France:
Germany: München, Tel: [phone], email: [e-mail]
Japan:
China:
Singapore: Parkway Centre, Tel: [phone], email: [e-mail]
4 Pin SIP Tube
4 Pin SIP Package
Mansfield (MA), Tel: [phone], email: [e-mail]
Toronto, Tel: [phone], email: [e-mail]
Milton Keynes, Tel: [phone], email: [e-mail]
Montigny Le Bretonneux, Tel: [phone], email: [e-mail]
Tokyo, Tel: [phone], email: [e-mail]
Osaka, Tel: [phone], email: [e-mail]
Shanghai, Tel: [phone], email: [e-mail]
Guangzhou, Tel: [phone], email: [e-mail]
Isolated 1W Single Output DC/DC Converters
Technical enquiries - email: [e-mail], tel:
NME 24V & 48V Series
KDC_NMEC.D03 Page 4 of 4
[phone]
Tube Quantity : 35