RSO-4805S/H3 Recom Power Inc, RSO-4805S/H3 Datasheet - Page 3

• Manufacturer Part Number: RSO-4805S/H3
• Description: CONV DC/DC 1W 36-72VIN 05VOUT
• Manufacturer: Recom Power Inc
• Series: Econoline RSOr
• Type: Isolated with Remote On/Offr

Specifications of RSO-4805S/H3

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 1W
• Mounting Type: Through Hole
• Voltage - Input: 36 ~ 72V
• Package / Case: 8-SIP Module (7 Leads)
• 1st Output: 5 VDC @ 200mA
• Size / Dimension: 0.86" L x 0.36" W x 0.44" H (21.8mm x 9.2mm x 11.1mm)
• Power (watts) - Rated: 1W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 78%
• Approvals: EN, UL
• Product: Isolated
• Output Power: 1 W
• Input Voltage Range: 36 V to 72 V
• Input Voltage (nominal): 48 V
• Output Voltage (channel 1): 5 V
• Isolation Voltage: 3 KV
• Package / Case Size: SIP-8
• Output Voltage: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Details
• Other names: 10004023

www.recom-international.com
ECONOLINE
DC/DC-Converter
Notes
Note 1
Certifications
EN General Safety
EN60601-1:1990 + A11:1996
Pin 8 (NC*) This pin is used internally and must have no external connection.
Pin 3 (CTRL)
This pin provides an Off function which puts the converter into a low power mode. When the pin is ‘high’ the converter is OFF and when the pin is high ‘Z’ the converter is ON. There is no
allowed low state for this pin.
Application Examples
Package Style and Pinning (mm)
TTL Remote CTRL Circuit
Control Pin Input Current:
Voltage Set Point Accuracy
with external input/output
capacitors refer to
recommended test circuit:
Control Pin (CTRL) Input
Current, control voltage
applied via 1K resistor,
output voltage must
reduce to 0V:
Isolated Remote CTRL Circuit
8 PIN SIP Package
XX.X ± 0.5 mm
XX.XX ± 0.25 mm
Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter
Report: PS-R7219C1
max. 6mA
typ. ± 1%
max. ±2%
typ. 3mA
10mA
Recommended Footprint Details
Voltage to be applied via a limiting resistor with a
recommended value of 1K for RSO-05xx; 3.3K for
RSO-12xx; RSO-24xx and 10K for RSO-48xx.
W
REV:1/2010
EN60950-1:2001 + A11:2004
W
W
Pin 5 (NC) Not connected internally.
RSO-S_D(Z)
Series
EN Medical Safety
Pin Connections
Pin #
NC = No Connection
NC* = NC, but no external Connection allowed.
1
2
3
5
6
7
8
Single
+Vout
–Vout
CTRL
–Vin
+Vin
NC*
NC
Report: PS071001601
+Vout
Dual
–Vout
CTRL
–Vin
+Vin
Com
NC
E-83