RP15-2405SFW Recom Power Inc, RP15-2405SFW Datasheet - Page 3

• Manufacturer Part Number: RP15-2405SFW
• Description: CONV DC/DC 15W 9-36VIN 05VOUT
• Manufacturer: Recom Power Inc
• Series: Powerline RP15-FWr
• Type: Isolatedr

Specifications of RP15-2405SFW

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 15W
• Mounting Type: Through Hole
• Voltage - Input: 9 ~ 36V
• Package / Case: 6-DIP Module
• 1st Output: 5 VDC @ 3A
• Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
• Power (watts) - Rated: 15W
• Operating Temperature: -40°C ~ 75°C
• Efficiency: 86%
• Approvals: cUL, UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Other names: 30000863

www.recom-international.com
POWERLINE
DC/DC-Converter
Specifications, cont.
Notes :
Package Style and Pinning (mm)
Conducted Emissions (see note 3)
Radiated Emissions (see note 3)
ESD
Radiated Immunity
Fast Transient (see note 3)
Surge (see note 3)
Conducted Immunity
Thermal Shock
Vibration
Relative Humidity
MTBF (see note 2)
1. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. RP15-24xxW meets Class A. RP15-48xxW requires 1µF MLCC across input to meet Class A.
4. Typical value at nominal input voltage and no load.
5. Maximum value at nominal input voltage and full load
6. Typical value at nominal input voltage and full load.
7. Test by minimum Vin and constant resistor load.
8. Optional Heatsink Part Number 7G-0020-C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
An external capacitor (220µF/Low ESR) is required to meet EN61000-4-4 and -5
See application notes for Class B commom mode filter suggestion.
(add suffix -HC). See Application Notes for heatsink details.
If no suffix is specified, the control pin will be omitted.
2” x 1” Package Style
Positive logic ON/OFF is marked with suffix-P (eg. RP15-2405SFW/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP15-2405SFW/N).
(typical at nominal input and 25°C unless otherwise noted)
REV:1/2010
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Bellcore-TR-NWT-000332
Pin Connections
Pin #
1
2
3
4
5
6*
* Optional. See Note 1.
Pin Pitch Tolerance ±0.35 mm
Single
No Pin
+Vout
CTRL*
-Vout
+Vin
-Vin
RP15-S_DFW
Series
+Vout
CTRL*
-Vout
Dual
+Vin
Com
-Vin
10-55Hz, 10G, 30 Min. along X, Y and Z
2350 x 10
MIL-STD-810D
5% to 95% RH
Perf. Critera B
Perf. Critera A
Perf. Critera B
Perf. Critera B
Perf. Critera A
P-55
Class A
Class A
3
hours