RP10-4815DEW/M2 Recom Power Inc, RP10-4815DEW/M2 Datasheet - Page 4

• Manufacturer Part Number: RP10-4815DEW/M2
• Description: CONV DC/DC 10W 18-75VIN +/-15V
• Manufacturer: Recom Power Inc
• Series: Powerline RP10-EWr
• Type: Isolatedr

Specifications of RP10-4815DEW/M2

• Output: ±15V
• Number Of Outputs: 2
• Power (watts): 10W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 75V
• Package / Case: 6-DIP Module
• 1st Output: 15 VDC @ 333mA
• 2nd Output: -15 VDC @ 333mA
• Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
• Power (watts) - Rated: 10W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 81%
• Approvals: cUL, UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 4th Output: -
• Other names: 30001352

www.recom-international.com
POWERLINE
DC/DC-Converter
Specifications
Package Style and Pinning (mm)
Notes :
Conducted Emissions (see Note 10)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Weight
Packing Quantity
Dimensions
MTBF (see Note 2)
1. The RP10 (W) series required a minimum 10% loading on the output to maintain specified regulation.
2. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
8. Heat sink is optional and P/N: 7G-0020C. Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
9. M2 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard version.
10. See application notes for EMI-filtering.
Operation under no-load condition will not damage these devices, however they may not meet all listed specification.
If no suffix is specified, the control pin will be omitted.
(add suffix -HC). See Application Notes for heatsink details.
Positive logic ON/OFF is marked with suffix-P (eg. RP10-2405SEW/P)
Negative logic ON/OFF is marked with suffix-N (eg. RP10-2405SEW/N).
(typical at nominal input and 25°C unless otherwise noted)
REV:1/2010
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Refer to App Notes for tube dimensions
Pin Connections
Pin #
1
2
3
4
5
6*
* Optional. See Note 7
RP10-S_DEW
Series
Pin Pitch Tolerance ±0.35 mm
Single
No Pin
CTRL*
+Vout
-Vout
+Vin
-Vin
CTRL*
+Vout
-Vout
Dual
+Vin
Com
-Vin
50.8 x 25.4 x 10.2mm
1976 x 10
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
Perf. Criteria B
9pcs per Tube
Level A
Level A
P-17
3
hours
27g