RP20-4815DFW Recom Power Inc, RP20-4815DFW Datasheet - Page 3

• Manufacturer Part Number: RP20-4815DFW
• Description: CONV DC/DC 20W 18-75VIN +/-15V
• Manufacturer: Recom Power Inc
• Series: Powerline RP20-FWr
• Type: Isolated with Remote On/Offr

Specifications of RP20-4815DFW

• Output: ±15V
• Number Of Outputs: 2
• Power (watts): 20W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 75V
• Package / Case: 6-DIP Module
• 1st Output: 15 VDC @ 667mA
• 2nd Output: -15 VDC @ 667mA
• Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
• Power (watts) - Rated: 20W
• Operating Temperature: -40°C ~ 63°C
• Efficiency: 86%
• Approvals: cUL, UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 4th Output: -
• Other names: 30000953

P-70
POWERLINE
DC/DC-Converter
Notes :
Specifications, cont.
Package Style and Pinning (mm)
Conducted Emissions (see Note 3)
Radiated Emissions (see Note 3)
ESD
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
Thermal Shock
Vibration
Relative Humidity
MTBF (see Note 2)
1. The RP20-S_DFW series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Requires external filter to meet EN55022 Class A and B. Refer to Application Notes.
4. Typical value at nominal input voltage and no load.
5. Maximum value at nominal input voltage and full load
6. Typical value at nominal input voltage and full load.
7. Test by minimum Vin and constant resistor load.
8. Optional Heatsink Part Number 7G-0020-C . Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
9. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
no-load condition will not damage these devices, however they may not meet all listed specification.
(add suffix -HC). See Application Notes for heatsink details.
Positive logic ON/OFF is standard, no suffix (Ex. RP20-2405SF)
Negative logic ON/OFF is marked with suffix-N (Ex. RP20-2405SF/N).
External Output Trimming
Single Output can be trimmed ±10% by using external resistors
See Application Notes for details
(typical at nominal input and 25°C unless otherwise noted)
REV: 1/2010
EN55022
EN55022
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Bellcore-TR-NWT-000332
Pin Connections
Pin #
1
2
3
4
5
6
Pin Pitch Tolerance ±0.35 mm
RP20-S_DFW
Series
Single
+Vout
-Vout
CTRL
+Vin
Trim
-Vin
+Vout
-Vout
CTRL
Dual
+Vin
Com
-Vin
10-55Hz, 10G, 30 Min. along X, Y and Z
www.recom-electronic.com
2350 x 10
MIL-STD-810D
5% to 95% RH
Perf. Critera B
Perf. Critera A
Perf. Critera B
Perf. Critera B
Perf. Critera A
Class A
Class A
3
hours