RP30-4805SFW/N Recom Power Inc, RP30-4805SFW/N Datasheet - Page 4

• Manufacturer Part Number: RP30-4805SFW/N
• Description: CONV DC/DC 30W 18-75VIN 05VOUT
• Manufacturer: Recom Power Inc
• Series: Powerline RP30-FWr
• Type: Isolated with Remote On/Offr

Specifications of RP30-4805SFW/N

• Output: 5V
• Number Of Outputs: 1
• Power (watts): 30W
• Mounting Type: Through Hole
• Voltage - Input: 18 ~ 75V
• Package / Case: 6-DIP Module
• 1st Output: 5 VDC @ 6A
• Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm)
• Power (watts) - Rated: 30W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 88%
• Approvals: cUL, UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Other names: 30002007

www.recom-international.com
POWERLINE
DC/DC-Converter
Notes :
Package Style and Pinning (mm)
Specifications
Conducted Emissions (see Note 10)
Radiated Emissions
ESD
Radiated Immunity
Fast Transient (see Note 9)
Surge (see Note 9)
Conducted Immunity
Weight
Packing Quantity
Dimensions
MTBF (see Note 2)
1. The RP30-S_DFW series does not require any minimum load.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment)
3. Simulated source impedance of 12μH. 12μH inductor in series with +Vin.
4. Typical value at nominal input voltage and no load of standard type
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
8. Heat sink is optional and P/N: 7G-0020-C . Powerline DC/DC Converters can be ordered with pre-mounted heatsinks including antivibration fixing clips
9. An external filter capacitor is required if the module has to meet EN61000-4-4,EN61000-4-5.
10. Meets class A with external components shown below. See application notes for Class B common mode filter suggestion
MIL-HDBK-217F Notice2 @ TA= 25°C, Full load (Ground, Begign, controlled environment)
Maximum value at nominal input voltage and full load of standard type.
The filter capacitor RECOM suggest: 24Vin : Nippon chemi-con KY series, 330μF/50V, ESR 55mΩ.
(add suffix -HC). See Application Notes for heatsink details.
Positive logic ON/OFF is standard, no suffix (Ex. RP30-2405SFW)
Negative logic ON/OFF is marked with suffix-N (Ex. R320-2405SFW/N).
(typical at nominal input and 25°C unless otherwise noted)
48Vin : Nippon chemi-con KY series, 220μF/100V, ESR 48mΩ.
REV:1/2010
EN55022
EN55022
EN61000-4-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
Refer to App Notes for tube dimensions
Belcore-TR-NWT-000332
MIL-HDBK-217F
Pin Connections
Pin #
1
2
3
4
5
6
Pin Pitch Tolerance ±0.25 mm
RP30-S_DFW
Series
Single
+Vout
CTRL
-Vout
+Vin
-Vin
Trim
+Vout
Dual
CTRL
-Vout
+Vin
Com
-Vin
Contact ±6KV
10 Vr.m.s
Air ±8KV
10V/m
±2KV
±1KV
50.8 x 25.4 x 10.2mm
3.163 x 10
4.347 x 10
9 pcs per Tube
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Class A
Class B
6
5
30.5g
hours
hours
P-87