VRBC-10E2A0G Bel Fuse Inc, VRBC-10E2A0G Datasheet
VRBC-10E2A0G
Specifications of VRBC-10E2A0G
Related parts for VRBC-10E2A0G
VRBC-10E2A0G Summary of contents
Page 1
... These converters are available in a range of output voltages from 0.75 Vdc to 3.63 Vdc over a wide range of input voltage (Vin = 4.5 Vdc - 14 Vdc). The Bel VRBC-10E2Ax has a sequencing feature that enables designers to implement various types of output voltage sequencing when powering. The efficiency is typically 94.3% at 3.3 V output at 5 ...
Page 2
... V 100% ~ 50% Max Load Settling Time Note: All specifications are typical at nominal input, full load at 25 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 0.75 Vdc - 3.63 Vdc/10 A Output Min Typ 4 ...
Page 3
... Measured at Vin=12 V, full load - - - - Calculated Per Bell Core TR-332 (I 80%Iomax; Vo=3.3 V; Vin= °C) - Notes VRBC-10E2A0; Remote On/Off pin open, Unit on. VRBC-10E2AL; Remote On/Off pin open, Unit on. Delay from Vinmin to application of voltage on SEQ pin Vinmin to Vinmax; Iomin to Iomax; Vseq< ...
Page 4
... Equation for calculating the trim voltage (in V) given the desired output voltage (Vo) is shown below. The Trim Up voltage should be connected between the Trim pin and Ground. = − 0667 trim Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 0.75 Vdc - 3.63 Vdc/10 A Output − 1000 × − 7525 ...
Page 5
... Module 1.2 V 90% 70% 50% 1.0 2.5 5.0 7.5 Output Current (A) Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 0.75 Vdc - 3.63 Vdc/10 A Output 5.0V 12.0V 10.0 5.0V 12.0V 10.0 110% 5.0V 12 ...
Page 6
... NON-ISOLATED DC/DC CONVERTERS 4.5 Vdc - 14 Vdc Input Thermal Derating Curves Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 0.75 Vdc - 3.63 Vdc/10 A Output Vin= 3.3 V Vin 3.3 V ...
Page 7
... Note: Ripple and noise at full load, external load with 10 uF tantalum capacitor and 1 uF ceramic at the output, and Ta=25 deg C. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 0.75 Vdc - 3.63 Vdc/10 A Output Vin=12 V, Vo=0 ...
Page 8
... Transient at Vin=12 V, Vo=3.3 V Note: Transient response at di/dt=2.5 A/uS, external load with 470 uF tantalum capacitor at the output. Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com 0.75 Vdc - 3.63 Vdc/10 A Output 100% to 50% load Transient at Vin=5 V, Vo=0 ...
Page 9
... Ground 6 Ground 7 Vin 8 Vin 9 SEQ 10 Trim 11 Remote On/Off © 2007 Bel Fuse Inc. Specifications subject to change without notice. 011707 EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com ...