VPU-S200-36 CUI Inc, VPU-S200-36 Datasheet - Page 2

• Manufacturer Part Number: VPU-S200-36
• Description: PWR SUPPLY W/PFC 200W 36V 5.5A
• Manufacturer: CUI Inc
• Series: V-Infinity VPU-S200r

Specifications of VPU-S200-36

• Voltage - Output: 36V
• Number Of Outputs: 1
• Power (watts): 200W
• Applications: Commercial
• Power Supply Type: Switching (Open Frame)
• Voltage - Input: 85 ~ 264VAC
• Mounting Type: Chassis Mount
• 1st Output: 36 VDC @ 5.5A
• Size / Dimension: 6.8" L x 3.8" W x 1.5" H (172.7mm x 96.5mm x 38.1mm)
• Power (watts) - Rated: 200W
• Operating Temperature: -10°C ~ 65°C
• Efficiency: 81%
• Approvals: CE, cUL, TUV, UL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Other names: 102-1486

PART NUMBER: VPU-S200
20050 SW 112
Input
Parameter
Input Frequency
Input Voltage
Input Current
Inrush Current
Power Factor
Output
Parameter
Efficiency
Start up time
Hold up time
Adjustability
Temp. Coefficient
Logic/Analog Signals
Parameter
Remote Control
Power Good
Remote Sense
RTN
Fan Drive
Parameter
FanDrive
th
Ave. Tualatin, Oregon 97062
Conditions/Description
Output power derated from 85-90 VAC
AC Input of 100 VAC
AC Input of 200 VAC
Peak measured at 100 VAC at full load, cold start
Peak measured at 200 VACat full load, cold start
AC Input of 100 VAC, at full load
AC Input of 200 VAC, at full load
Conditions/Description
See Model Configurations.
At 85 VAC, full load
At 115 VAC, full load
Adjustable with built-in trim pot.
Conditions/Description
Conditions/Description
Remote On/Off function is controlled using pins REMO(2) and RTN(1) on
logic connector CN4, in order to use the Remote On/Off function first
connect jumper JP1 between pins 2 and 3 on JP1 on the power
supply. A supply voltage of 3-15Vdc between the REMO(2) and RTN(1) pin
on CN4 will activate the Remote On. Please note RTN(1) pin on CN4 is not
in contact with -Vout or RTN(4) but can be shorted with no problems.
Goes high 100-500 mS after the output reaches regulation.
It goes low at least 1mS before loss of regulation.
Remote sense terminals force regulation to where sensing terminals
are connected.
Please note RTN(1) pin on CN4 is not in contact with -Vout or
RTN(4) but can be shorted with no problems.
Provides 12V, 250mA to drive a DC fan. Minimum load is required on
the power supply output for the voltage on the fan drive to be in regulation.
phone
phone [phone] fax
DESCRIPTION: switching power supply
-0.05
fax [phone]
Min
Min
- 10
120
47
85
20
Nom
1400
Nom
700
99
95
+0.05
Max
Max
264
340
500
+10
63
20
40
rev.
page
date
Units
Units
%/ºC
VDC
VAC
mA
mA
mS
mS
Hz
%
%
%
A
A
11/2007
2 of 5