S8PS-05005CD Omron, S8PS-05005CD Datasheet - Page 12

• Manufacturer Part Number: S8PS-05005CD
• Description: POWER SUPPLY 5V 10A DIN RAIL
• Manufacturer: Omron
• Series: S8PSr

Specifications of S8PS-05005CD

• Mounting Type: DIN Rail
• Voltage - Output: 5V
• Number Of Outputs: 1
• Power (watts): 50W
• Applications: Commercial
• Power Supply Type: Switching (Closed Frame)
• Voltage - Input: 85 ~ 264VAC
• 1st Output: 5 VDC @ 10A
• Size / Dimension: 5" L x 1.57" W x 3.35" H (127mm x 40mm x 85mm)
• Power (watts) - Rated: 50W
• Operating Temperature: -10°C ~ 55°C
• Efficiency: 80%
• Approvals: CSA, EN, UL, VDE
• No. Of Outputs: 1
• Output Voltage: 5V
• Output Current: 10A
• Power Rating: 50W
• Input Voltage: 100V AC To 240V AC
• Output Current 1: 10A
• Output Power: 50W
• External Height: 85mm
• Product: Switching
• Output Power Rating: 50 W
• Output Voltage (channel 1): 5 V
• Output Current (channel 1): 10 A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: S8PS05005CD; Z1173

Safety Precautions
■ Precautions for Safe Use
Mounting
To improve and maintain the reliability of the Power Supply over a
long period of time, adequate consideration must be given to heat
radiation.
The Power Supply is designed to radiate heat by means of natural
air-flow. Therefore, mount the Power Supply so that air flow takes
place around the Power Supply.
Use a metal plate as the mounting panel.
Forced air-cooling is highly recommended.
Wiring
Connect the ground completely. Electric shock may occur if the
ground is not connected completely.
Do not apply more than 75-N force to the terminal block when
tightening it.
Buzzing Noise When the Input Is
Turned ON
A harmonic current suppression circuit is built into the input power.
This circuit can create noise when the input is turned ON, but it will
last only until the internal operation stabilizes and does not indicate
any problem in the Power Supply.
Generating Output Voltage (±)
An output of ± can be generated by using two Power Supplies as
shown below, because the Power Supply produces a floating output.
Minor electric shock, fire, or Product failure may
occasionally occur. Do not disassemble, modify, or repair
the Product or touch the interior of the Product.
Minor burns may occasionally occur. Do not touch the
Product while power is being supplied or immediately
after power is turned OFF.
Fire may occasionally occur. Tighten terminal screws to
the specified torque 1.08 N·m (M4).
Electric shock due to residual voltage may occur. Do not
touch the Product for at least 1 minute after the input
power is turned OFF.
Minor electric shock, fire, or Product failure may
occasionally occur. Do not allow any pieces of metal or
conductors or any clippings or cuttings resulting from
installation work to enter the Product.
Correct
Input
http://www.ia.omron.com/
INPUT
INPUT
!CAUTION
+ V
− V
+ V
− V
Series Operation
All models allow series operation.
As shown in the following diagram, the output voltage from each
Switching Power Supply can be added.
Parallel Operation
Only 300- and 600-W models can be in parallel operation. Do not
operate any other models in parallel. (A maximum of two Power
Supplies can be used in parallel operation and they must have the
same model number.)
Make sure that the thickness and the length of all wires connected to
the load are the same to ensure that the wires will have no voltage
drop differences.
Fan Replacement
The service life of the fan is approximately 50,000 hours (at 25°C).
The service life varies, however, depending on the ambient tempera-
ture or other surrounding environmental conditions such as dust. As
a preventive maintenance measure, replace the fan within two years
if it is used at an ambient temperature of 40°C.
Fans are available as replacements.
Fan Set:
Fan (above), four M4 x 35 sems screws, instruction sheet, and
packing case
Replace the fan as shown in the following illustration.
Correct
Correct
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
INPUT
INPUT
INPUT
INPUT
+ V
− V
+ V
− V
+V
−V
+V
−V
Model: S82Y-JFAN
S8PS
12