101-0393 Rabbit Semiconductor, 101-0393 Datasheet - Page 140

• Manufacturer Part Number: 101-0393
• Description: CARD D/A 0-10V SR9400 SMARTSTAR
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0393

• Accessory Type: Smart Star D/A Card
• For Use With/related Products: SR9400
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

The SR9050 backplane can also be panel-mounted behind the LCD/keypad module.
1. Prepare a cutout and install the LCD/keypad module in the cutout as explained in
2. Use brackets to secure the LCD/keypad module to the panel using the four 4-40 screws
3. Use a ribbon cable to connect header J6 on the backplane to header J1 on the LCD/key-
4. Secure the Smart Star backplane using four 4-40 × ½" or 6-32 × ½" screws at the screw
Brackets and ribbon cables are sold separately. Note that only a Smart Star assembly using
the SR9050 backplane can be panel-mounted.
140
Section B.5.2.1.
and washers included with the LCD/keypad module. The four screw positions are indi-
cated with the number 1 in Figure B-10. If your panel is thick, use a 4-40 screw that is
approximately 3/16" (5 mm) longer than the thickness of the panel.
pad module. Note the pin 1 positions reflected by the red-colored line in the ribbon
cable shown in Figure B-10.
positions indicated with the number 2 in Figure B-10.
Figure B-10. Install Smart Star Backplane Behind LCD/Keypad Module
Smart Star (SR9000)