28106 Parallax Inc, 28106 Datasheet

Page 1

... The remaining wheels are not used for this application. However, the wheels with sprockets can be modified and used if there is a tread alignment problem; for details refer to the “Troubleshooting the Tread” section on page 4. Copyright © Parallax, Inc. • Boe-Bot Tank Tread Kit (#28106) • v2.0 8/10/2007 Web Site: www.parallax.com Office: (916) 624-8333 Forums: forums ...

Page 2

... Confirm that the servos are mounted correctly. If your servos are mounted the opposite way, or are mounted from inside the chassis, remove them and remount as shown. Servo head is mounted toward tail wheel Copyright © Parallax, Inc. • Boe-Bot Tank Tread Kit (#28106) • v2.0 8/10/2007 Enlarge Inner Holes if using Standard Servo Horns ←Wrong Way→ ...

Page 3

... If any wheels bind, loosen the nut and remount to maintain a very small gap between the wheel and nut. Carefully stretch the tread over the wheels. Copyright © Parallax, Inc. • Boe-Bot Tank Tread Kit (#28106) • v2.0 8/10/2007 ® ...

Page 4

... You will need to drill or cut the end of the wheel so the screw will go through. Copyright © Parallax, Inc. • Boe-Bot Tank Tread Kit (#28106) • v2.0 8/10/2007 If you experience any problems with the assembly or use of your Tank Treads, you may contact us at support@parallax ...