AC164335 Microchip Technology, AC164335 Datasheet - Page 219

• Manufacturer Part Number: AC164335
• Description: MODULE SKT FOR 10X10 PM3 44TQFP
• Manufacturer: Microchip Technology

Specifications of AC164335

• Module/board Type: Socket Module - TQFP
• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: MPLAB® PM3
• For Use With: DV007003 - PROGRAMMER UNIVERSAL PROMATE II
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Not applicable / Not applicable

TABLE 18-7:
18.11 In-Circuit Debugger
When MPLAB
in-circuit debugging functionality is enabled. This func-
tion allows simple debugging functions when used with
MPLAB IDE. When the device has this feature enabled,
some of the resources are not available for general
use. These resources include the first 80 bytes of data
RAM and two I/O pins.
One of four pairs of Debug I/O pins may be selected by
the user using configuration options in MPLAB IDE.
These pin pairs are named EMUD/EMUC, EMUD1/
EMUC1 and EMUD2/EMUC2.
In each case, the selected EMUD pin is the Emulation/
Debug Data line, and the EMUC pin is the Emulation/
Debug Clock line. These pins will interface to the
MPLAB ICD 2 module available from Microchip. The
selected pair of Debug I/O pins is used by
MPLAB ICD 2 to send commands and receive
responses, as well as to send and receive data. To use
the in-circuit debugging function of the device, the
design must implement ICSP connections to MCLR,
V
EMUDx/EMUCx pin pair.
© 2006 Microchip Technology Inc.
FWDTEN
WWDTEN
WDTPRE
WDTPOST<3:0>
FPWRT<2:0>
DD
, V
Bit Field
SS
, PGC, PGD and the selected
®
ICD 2 is selected as a debugger, the
FWDT AND FPOR BIT DESCRIPTIONS FOR dsPIC30F1010/202X
Register
FWDT
FWDT
FWDT
FWDT
FPOR
Watchdog Timer Enable bit
1 = Watchdog Timer always enabled. (LPRC oscillator cannot be dis-
0 = Watchdog Timer enabled/disabled by user software (LPRC can be
Watchdog Timer Window Enable bit
1 = Watchdog Timer in Non-Window mode
0 = Watchdog Timer in Window mode
Watchdog Timer Prescaler bit
1 = 1:128
0 = 1:32
Watchdog Timer Postscaler bits
1111 = 1:32, 768
1110 = 1:16, 384
.
.
.
0001 = 1:2
0000 = 1:1
Power-on Reset Timer Value Select bits
111 = PWRT = 128 ms
110 = PWRT = 64 ms
101 = PWRT = 32 ms
100 = PWRT = 16 ms
011 = PWRT = 8 ms
010 = PWRT = 4 ms
001 = PWRT = 2 ms
000 = PWRT = Disabled
abled. Clearing the SWDTEN bit in the RCON register will have no
effect.)
disabled by clearing the SWDTEN bit in the RCON register)
Preliminary
This gives rise to two possibilities:
1.
2.
dsPIC30F1010/202X
If EMUD/EMUC is selected as the debug I/O pin
pair, then only a 5-pin interface is required, as
the EMUD and EMUC pin functions are multi-
plexed with the PGD and PGC pin functions in
all dsPIC30F devices.
If
selected as the debug I/O pin pair, then a 7-pin
interface is required, as the EMUDx/EMUCx pin
functions (x = 1 or 2) are not multiplexed with the
PGD and PGC pin functions.
EMUD1/EMUC1
Description
or
EMUD2/EMUC2
DS70178C-page 217
is