AC164336 Microchip Technology, AC164336 Datasheet - Page 179

• Manufacturer Part Number: AC164336
• Description: MODULE SOCKET FOR PM3 28/44QFN
• Manufacturer: Microchip Technology

Specifications of AC164336

• Module/board Type: Socket Module - QFN
• Product: Microcontroller Accessories
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: MPLAB® PM3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Not applicable / Not applicable

REGISTER 16-6:
© 2006 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12-8
bit 7
bit 6
bit 5
IRQEN3
IRQEN2
R/W-0
R/W-0
IRQEN3: Interrupt Request Enable 3 bit
1 = Enable IRQ generation when requested conversion of channels AN7 and AN6 is completed.
0 = IRQ is not generated
PEND3: Pending Conversion Status 3 bit
1 = Conversion of channels AN7 and AN6 is pending. Set when selected trigger is asserted.
0 = Conversion is complete
SWTRG3: Software Trigger 3 bit
1 = Start conversion of AN7 and AN6 (if selected by TRGSRC bits). If other conversions are in
progress, then conversion will be performed when the conversion resources are available. This bit will
be reset when the PEND bit is set.
TRGSRC3<4:0>: Trigger 3 Source Selection bits
Selects trigger source for conversion of analog channels A7 and A6.
00000 = No conversion enabled
00001 = Individual software trigger selected
00010 = Global software trigger selected
00011 = PWM Special Event Trigger selected
00100 = PWM generator #1 trigger selected
00101 = PWM generator #2 trigger selected
00110 = PWM generator #3 trigger selected
00111 = PWM generator #4 trigger selected
01100 = Timer #1 period match
01101 = Timer #2 period match
01110 = PWM GEN #1 current-limit ADC trigger
01111 = PWM GEN #2 current-limit ADC trigger
10000 = PWM GEN #3 current-limit ADC trigger
10001 = PWM GEN #4 current-limit ADC trigger
10110 = PWM GEN #1 fault ADC trigger
10111 = PWM GEN #2 fault ADC trigger
11000 = PWM GEN #3 fault ADC trigger
11001 = PWM GEN #4 fault ADC trigger
IRQEN2: Interrupt Request Enable 2 bit
1 = Enable IRQ generation when requested conversion of channels AN5 and AN4 is completed
0 = IRQ is not generated
PEND2: Pending Conversion Status 2 bit
1 = Conversion of channels AN5 and AN4 is pending. Set when selected trigger is asserted
0 = Conversion is complete
SWTRG2: Software Trigger 2 bit
1 = Start conversion of AN5 and AN4 (if selected by TRGSRC bits). If other conversions are in
progress, then conversion will be performed when the conversion resources are available. This bit will
be reset when the PEND bit is set
PEND3
PEND2
R/W-0
R/W-0
A/D CONVERT PAIR CONTROL REGISTER #1 (ADCPC1)
W = Writable bit
‘1’ = Bit is set
SWTRG3
SWTRG2
R/W-0
R/W-0
R/W-0
R/W-0
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
R/W-0
dsPIC30F1010/202X
TRGSRC3<4:0>
TRGSRC2<4:0>
R/W-0
R/W-0
x = Bit is unknown
R/W-0
R/W-0
DS70178C-page 177
R/W-0
R/W-0
bit 8
bit 0