MAX9526EVKIT+ Maxim Integrated Products, MAX9526EVKIT+ Datasheet - Page 5

• Manufacturer Part Number: MAX9526EVKIT+
• Description: EVALUATION KIT FOR MAX9526
• Manufacturer: Maxim Integrated Products

Specifications of MAX9526EVKIT+

• Main Purpose: Video, Video Processing
• Embedded: No
• Utilized Ic / Part: MAX9526
• Primary Attributes: NTSC/PAL Digital Video Decoder
• Secondary Attributes: ITU-Compliant Output
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Registers 0x00 and 0x01 are read-only status displays.
All the other registers have Read and Write buttons.
The Read All and Write All buttons read or write all the
MAX9526 device registers. The Reset to Default
Values button allows writing all the MAX9526 device
registers to their default state.
The MAX4586 Video Input Multiplexer tab sheet has a
set of five radio buttons, selecting IN1 = IN1A, IN1B,
the unconnected input pins, or nothing. Note: The EV
kit hardware does not connect all MAX4586 inputs.
The ITU Demultiplexer tab sheet controls the
ADV7176A MODE0, MODE1, and MODE2 registers.
The Interface History tab sheet provides a list of the
I
microcontroller.
Figure 2. Advanced User Interface Window
2
C and other commands generated by the on-board
MAX4586 Video Input Multiplexer Tab
MAX9526 Video Decoder Tab
_______________________________________________________________________________________
ITU Demultiplexer Tab
Interface History Tab
MAX9526 Evaluation Kit
The Options | Interface (Advanced Users) menu item
brings up the Advanced User Interface window shown
in Figure 2. This window allows sending arbitrary com-
mands on the I
Register configuration can be saved to a file and later
reloaded by the software. From the File menu, select
either the Load Configuration File or the Save
Configuration File As… menu item. The MAX9526
read-only status registers (0x00 and 0x01) are saved
but not restored when configuration is loaded. The
MAX4586 device (U5) saves the channel selection from
the software GUI. The ITUDEMUX device (U6) saves
only four of its registers (0x00, 0x01, 0x07, and 0x0D).
Any registers added by manually editing the configura-
tion file are not checked for data integrity.
2
C bus.
Configuration File Format
Advanced User Interface
5