IRDC3822A International Rectifier, IRDC3822A Datasheet - Page 15

• Manufacturer Part Number: IRDC3822A
• Description: BOARD EVAL SYNC BUCK CONVERTER
• Manufacturer: International Rectifier

Solder Resist
It is recommended that the lead lands are Non Solder Mask Defined (NSMD). The solder resist
should be pulled away from the metal lead lands by a minimum of 0.025mm to ensure NSMD
pads.
The land pad should be Solder Mask Defined (SMD), with a minimum overlap of the solder resist
onto the copper of 0.05mm to accommodate solder resist mis-alignment.
Ensure that the solder resist in between the lead lands and the pad land is ≥ 0.15mm due to the
high aspect ratio of the solder resist strip separating the lead lands from the pad land.
Rev 0.0
02/22/2008
IRDC3822A