DV164122 Microchip Technology, DV164122 Datasheet - Page 91

• Manufacturer Part Number: DV164122
• Description: ANALYZER SRL PICKIT W/DEMO BOARD
• Manufacturer: Microchip Technology
• Series: PICkit™r
• Type: MCUr

Specifications of DV164122

• Contents: PICkit™ Serial Analyzer, 28-pin Demo Board, USB Cable, and Software with Documentation CD
• Processor To Be Evaluated: PIC16F886
• Interface Type: USB
• Silicon Manufacturer: Microchip
• Kit Application Type: Interface
• Application Sub Type: USB
• Silicon Family Name: PIC16F
• Kit Contents: PICkit Serial Analyzer, Demo Board, USB Cable, Software
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: PIC16F886
• For Use With: PKSERIAL-SPI1 - BOARD DEMO PICKIT SERIAL SPIPKSERIAL-I2C1 - BOARD DEMO PICKIT SERIAL I2C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3260228

10.4
© 2007 Microchip Technology Inc.
MY TEMPLATES
• Graph – allows the data to be graphed during run time. The popup graph may be
Once the parameter(s) are entered, they can be saved as a User Defined Parameter
file (*.udp).
• File->Open – Open an existing User Defined Parameter file (*.udp)
• File->Save – Save or replace a User Defined Parameter file (*.udp)
• Clear All – Resets (clears) all parameter boxes
OPTIONS
• Run All – Runs all parameter scripts above that are marked as active.
• Iterations – How many times you wish to run the set of active parameters.
• Delay – time in between each parameter.
• Error Timeout – time the GUI will wait for a completed response to the script. If
When the User Defined Parameter file has been saved, it will be displayed under the
User Defined Templates > My Templates on the menu bar, as shown in Figure 10-2.
FIGURE 10-2:
This implementation of the User Defined Template differs from the one in the prior
release of PICkit Serial Analyzer in that you create and run the template on the same
form. This allows for a great deal of run time flexibility. For example, you can change
any of the Inputs from section 10.3 while you are running the scripts in a loop.
resized as needed.
you are running long scripts – you may wish to increase this value.
Note:
The User Defined Parameter file (*.udp) must be stored in the same direc-
tory as the PICkit Serial Analyzer executable (by default C:\Program
Files\Microchip\PICkit Serial Analyzer). Otherwise it will not be displayed
under the My Templates menu selection.
SELECTING MY TEMPLATES
DS51647B-page 85