G2R-24-DC24 Omron, G2R-24-DC24 Datasheet - Page 19

• Manufacturer Part Number: G2R-24-DC24
• Description: RELAY PC MNT PWR DPDT 5A 24VDC
• Manufacturer: Omron
• Series: G2Rr

Specifications of G2R-24-DC24

• Relay Type: General Purpose
• Coil Resistance: 1.1 K Ohms
• Contact Form: DPDT (2 Form C)
• Contact Rating (current): 5A
• Switching Voltage: 380VAC, 125VDC - Max
• Coil Type: Standard
• Coil Current: 21.8mA
• Coil Voltage: 24VDC
• Turn On Voltage (max): 16.8 VDC
• Turn Off Voltage (min): 3.6 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: DPDT (2 Form C)
• Contact Rating @ Voltage: 5A @ 250VAC
• Control On Voltage (max): 16.8 VDC
• Control Off Voltage (min): 3.6 VDC
• Contact Rating: 5 A
• Contact Termination: Solder Pin
• Mounting Style: Through Hole
• Power Consumption: 530 mW
• Contact Material: Silver Alloy
• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 5A
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 30V
• Contact Configuration: DPDT
• Current, Rating: 5 A
• Diameter, Mounting: 0.05 in.
• Dielectric Rating: 5000 VAC (Between Coil to Contacts), 1000 VAC (Across Contacts of Sample Pole, Between Set and Reset Coils of Dual Coil Latching), 3000 VAC (Between contact Sets, 2-Pole Non-Latching),
• Dimensions: 1.14 in. L x 0.51 in. W x 1 in. H
• Function: Power
• Material, Contact: AgCdO
• Number Of Pins: 8
• Power, Rating: 1250⁄150 VA⁄W
• Standards: UL, CSA, VDE, CE
• Temperature, Operating, Maximum: 70 °C
• Temperature, Operating, Minimum: -40 °C
• Termination: Through Hole
• Voltage, Control: 24 VDC
• Voltage, Rating: 380 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: G2R-214P-V-US-DC24; G2R-24 DC24; G2R-24-DC24BYKUM; G2R24DC24; G2R24DC24BYKUM; Z748

G2R
Precautions
I
When mounting a number of relays on a PCB, be sure to provide
a minimum mounting space of 5 mm between the two juxtaposed
relays as shown below.
Cat. No. K013-E1-11B
5 mm min.
Mounting
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
5 mm min.
The above minimum mounting space is necessary due to mutual
thermal interference generated by the relays. This restriction may
be ignored, however, depending on the operating conditions of
the relays. Consult OMRON for details.
There is no restriction on the mounting direction of each relay on
the PCB.
When using this circuit, confirm the set and reset states and then
take into account the circuit constant.
G2R
19