HE2AN-SW-DC24V Panasonic Electric Works, HE2AN-SW-DC24V Datasheet - Page 9

• Manufacturer Part Number: HE2AN-SW-DC24V
• Description: RELAY POWER 25A 24VDC SCREW WIDE
• Manufacturer: Panasonic Electric Works
• Series: HEr

Specifications of HE2AN-SW-DC24V

• Relay Type: General Purpose
• Contact Form: DPST (2 Form A)
• Contact Rating (current): 25A
• Switching Voltage: 277VAC
• Coil Type: Standard
• Coil Current: 80mA
• Coil Voltage: 24VDC
• Turn On Voltage (max): 16.8 VDC
• Turn Off Voltage (min): 2.4 VDC
• Mounting Type: Chassis Mount
• Termination Style: Screw Terminal
• Circuit: DPST (2 Form A)
• Contact Rating @ Voltage: 25A @ 277VAC
• Control On Voltage (max): 16.8 VDC
• Control Off Voltage (min): 2.4 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 255-1674; 255-1674; 255-2783

HE RELAY ACCESSORIES
MOUNTING METHOD
1. Relay mounting
NOTES
1. Be careful not to drop the relay. It is
made of heat-hardened resin and may
break.
2. Be sure to tighten the screw-down
terminals firmly. Loose terminals may
lead to the generation of heat.
3. When the 1 Form A is used in
situations covered by the Japanese
Electrical Appliance and Material
Control Law, the use of 5.5 mm
cabling and 30 A current is not
allowed. Consequently, the circuit
should be less than 20 A.
2
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
2. Installing to a DIN rail
4. When fixing the terminal socket with
screws, to avoid torque damage and
distortion, apply torque within the
ranges shown below.
M3.5 screws:
0.784 to 0.98 N·m (8 to 10 kgf·cm)
M4 screws:
1.176 to 1.37 N·m (12 to 14 kgf·cm)
Push
3. Removing from a DIN rail
Flat-head screwdriver