SDT-S-148DMR,000 Tyco Electronics, SDT-S-148DMR,000 Datasheet - Page 3

• Manufacturer Part Number: SDT-S-148DMR,000
• Description: RELAY PWR MINI 10A PCB
• Manufacturer: Tyco Electronics
• Series: SDT-R, OEGr

Specifications of SDT-S-148DMR,000

• Relay Type: General Purpose
• Contact Form: SPST-NO (1 Form A)
• Contact Rating (current): 10A
• Switching Voltage: 250VAC
• Coil Type: Standard
• Coil Current: 11.25mA
• Coil Voltage: 48VDC
• Turn On Voltage (max): 36 VDC
• Turn Off Voltage (min): 4.8 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: SPST-NO (1 Form A)
• Contact Rating @ Voltage: 10A @ 250VAC
• Control On Voltage (max): 36 VDC
• Control Off Voltage (min): 4.8 VDC
• Mounting Style: PCB
• Power Consumption: 540 mW
• Contact Material: Silver Tin Oxide
• Coil Resistance: 4400 Ohms
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1461023-2

Rev. A1
5.9 耐サージ電圧
5.10 温度上昇
5.11 耐振動性
5.12 耐衝撃性
5.13 端子強度
5.14 耐熱性
SURGE RESISTIVENESS
TEMPERATURE RISE
(1)
(2)
VIBRATION
(1)
(2)
SHOCK
(1)
(2)
TERMINAL STRENGTH
THERMAL PROOF
コイル
接点
誤動作
耐久
誤動作
ERROR OPERATION
耐久
ENDURANCE
COIL
CONTACT
ERROR OPERATION
ENDURANCE
Product Specification
コイル接点間 10kV(1.2/50μs)
接点定格電流を通電し、コイルに定格電圧１１０％を印加し、抵抗法
にて 55Ｋ以下
接点に 10A を通電し、コイルに定格電圧を印加し、温度計法にて
復振幅 1.5mm、振動数 10～55Hz の可変振動を 3 方向各 5 分間
加速度 98m／s² 作用時間 11ms の衝撃を 3 方向に各 3 回
各端子に押し込み・引っ張り 5N を 10 秒間加えて、外観
特性に異常なきこと。
85℃中に 240 時間放置し、その後 2 時間常温・常湿中に放置し、
55K Max. by resistance method when the rated current is provided to contact
and 110% of rated voltage is supplied to relay coil.
(Amplitude 1.5mm. 10 – 55Hz)
６５Ｋ以下
加え、1ms 以上の接点誤動作なきこと。
No error operation than 1ms Max. when vibrate it from 3 directions for 5 minutes.
復振幅 1.5mm、振動数 10～55Hz の可変振動を 3 方向各 2 時間
加えた後、構造・特性に異常なきこと。
No construction trouble when vibrate it from 3 directions for 2 hours.
(Amplitude 1.5mm. 10 – 55Hz)
加えた時、１ms 以上の接点誤動作なきこと。
No error operate by contact more than 1ms Max. when shocks it from 3 directions
3 times. (at Peak acceleration 98 m/
加速度 980m／s² 作用時間 6ms の衝撃を 3 方向に各 3 回
加えた後、構造・特性に異常なきこと。
No construction trouble when shocks is from 3 directions 3 times.
(at Peak acceleration 980 m/s²
No construction and exterior trouble when pull and push into any terminals by 5N
for 10sec.
構造・特性に異常なきこと。
Not any trouble on construction and characteristic when leave in 85℃ 240h
After that, leave it in standard condition for 2 hours.
Between coil to contact. 10kV (1.2/50μs)
65K Max. by temperature measuring method at Contact: 10A, Coil: rated voltage
Duration 6ms.)
s
²
Duration 11ms.)
108-79440
3 of 6