G6K-2P DC24 Omron, G6K-2P DC24 Datasheet - Page 9

RELAY TELCOM DPDT 1A 24VDC PCB

G6K-2P DC24

Manufacturer Part Number
G6K-2P DC24
Description
RELAY TELCOM DPDT 1A 24VDC PCB
Manufacturer
Omron
Series
G6Kr
Datasheet

Specifications of G6K-2P DC24

Relay Type
Telecom
Circuit
DPDT (2 Form C)
Contact Rating @ Voltage
1A @ 30VDC
Coil Type
Standard
Coil Current
4.6mA
Coil Voltage
24VDC
Control On Voltage (max)
19.2 VDC
Control Off Voltage (min)
2.4 VDC
Mounting Type
Through Hole
Termination Style
PC Pin
Contact Form
DPDT
Current, Rating
0.3⁄1 AAC⁄ADC
Function
Sensitive
Number Of Pins
8
Power, Rating
37.5⁄30 VA⁄W
Standards
UL, CSA, RoHS
Termination
Through Hole
Voltage, Control
24 VDC
Voltage, Rating
125 VAC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
G6K-2P-DC24
G6K2PDC24
Z118
• Must not cause thermal changes in or deterioration of the insulating
• Must not cause damage to other control devices.
• Must not cause any harmful effect on people.
• Must not cause fire.
Therefore, be sure to use the maximum allowable voltage as speci-
fied in the catalog.
As a rule, the rated voltage must be applied to the coil. A voltage
exceeding the rated value, however, can be applied to the coil pro-
vided that the voltage is less than or equal to the maximum allowable
voltage. It must be noted that continuous voltage application to the
coil will cause a coil temperature increase which may affect charac-
teristics such as electrical life and coil insulation.
Coating
The Relay mounting on the PCB may be coated or washed but do not
apply silicone coating or detergent containing silicone, otherwise the
silicone coating or detergent may remain on the surface of the Relay.
PCB Mounting
If two or more Relays are closely mounted with the long sides of the
Relays facing each other and soldering is performed with infrared
radiation, the solder may not be properly exposed to the infrared
rays. Be sure to keep the proper distance between adjacent Relays
as shown below to insure formation of good solder joints.
Two or more Relays may be mounted as closely as desired with the
short sides of the Relays facing each other.
material.
G6K-2G
G6K-2F
2 mm min.
2.7 mm min.
Low Signal Relay
G6K
75

Related parts for G6K-2P DC24