PS7122-1A CEL, PS7122-1A Datasheet - Page 7

• Manufacturer Part Number: PS7122-1A
• Description: SSR OCMOS FET 200MA NO 6-DIP
• Manufacturer: CEL
• Series: PS, OCMOSr

Specifications of PS7122-1A

• Circuit: SPST-NO (1 Form A)
• Output Type: AC, DC
• On-state Resistance: 5 Ohm
• Load Current: 200mA
• Voltage - Input: 1.2VDC
• Voltage - Load: 0 ~ 200 V
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Package / Case: 6-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant
• Other names: PS7122-1ANEC

(1) Infrared reflow soldering
RECOMMENDED SOLDERING CONDITIONS
(2) Dip soldering
(3) Cautions
• Peak reflow temperature
• Time of temperature higher than 210 °C
• Number of reflows
• Flux
• Temperature
• Time
• Number of times
• Flux
• Fluxes
Avoid removing the residual flux with freon-based cleaning solvent.
DATA SUBJECT TO CHANGE WITHOUT NOTICE
CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • [phone] • Telex 34-6393 • FAX [phone]
EXCLUSIVE NORTH AMERICAN AGENT FOR
24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM
100 to 160 ˚C
Recommended Temperature Profile of Infrared Reflow
235 °C or below (package surface temperature)
30 seconds or less
Two
Rosin flux containing small amount of chlorine
260 °C or below (molten solder temperature)
10 seconds or less
One
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(preheating)
60 to 120 s
Time (s)
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
(heating)
to 10 s
to 30 s
PS7122-1A,-2A, PS7122L-1A,-2A
235 ˚C (peak temperature)
210 ˚C
08/15/2001