H2C-8R AC100/110 B Omron, H2C-8R AC100/110 B Datasheet - Page 9

• Manufacturer Part Number: H2C-8R AC100/110 B
• Description: MOTOR TIMER 8PIN SOCKET 100-110V
• Manufacturer: Omron
• Series: H2Cr

Specifications of H2C-8R AC100/110 B

• Relay Type: Integrated
• Function: Motor Timer
• Circuit: SPDT (1 Form C)
• Delay Time: 0.2 Sec ~ 6 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 6A @ 250VAC
• Voltage - Supply: 100 ~ 110VAC
• Mounting Type: Socket
• Termination Style: 8 Pin Socketable
• Timing Adjustment Method: Hand Dial
• Timing Initiate Method: Input Voltage
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H2C-8RAC100/110B; H2C8RAC100110B

H2C
H2C
Several timers may be panel mounted close together using the Y92F-30 adapter as
shown here. When mounting two or more timers in a vertical line, arrange the adaptors so
that their molded tabs are positioned on the right and left sides. When mounting two or
more timers in a horizontal line, arrange the adapters so that their molded tabs are
positioned on the top and bottom sides.
Using Y92F-70 and Y92F-71 Adapters
Install the H2C-8 and H2C-8R timer, face first, into the back side of the Y92F-70 or
Y92F-71 adapter so the bezel fits snugly. Be sure the retaining clips at the back of the
adapter fit into the slots on either side of the timer. Compress the top and bottom tabs of
the adapter then push the adapter through the front side of the panel cutout. Be sure the
tabs extend after installation for a secure fit.
To remove the timer from the adapter, unclip the two retaining clips at the back of the
adapter. To remove the adapter and timer from the panel as a unit, compress the tabs
behind the panel and push the unit out the front of the panel.
I TRACK MOUNTING
H2C-F with Built-in Track Adapter
Mounting
First, hook portion "A" on the rear of the timer onto and edge of the track. Then, press the
timer in direction "B" until the latch on the bottom rear of the timer latches securely.
Removal
Pull the latch "C" with a flat blade screwdriver and remove the timer from the mounting
track.
9