ACASA1002E1502P100 Vishay, ACASA1002E1502P100 Datasheet - Page 5

• Manufacturer Part Number: ACASA1002E1502P100
• Description: RES ARRAY 10K/15K OHM 4RES SMD
• Manufacturer: Vishay
• Series: ACAr

Specifications of ACASA1002E1502P100

• Temperature Coefficient: ±25ppm/°C
• Resistance (ohms): 10K, 15K
• Number Of Resistors: 4
• Circuit Type: Isolated
• Tolerance: ±0.25%
• Power Per Element: 100mW
• Number Of Pins: 8
• Package / Case: 0613 (1532 Metric), Convex
• Size / Dimension: 0.059" L x 0.126" W (1.50mm x 3.20mm)
• Height: 0.018" (0.45mm)
• Mounting Type: Surface Mount
• Operating Temperature: -55°C ~ 125°C
• Resistance: 15kohm
• Resistance Tolerance: ± 0.05%
• Power Rating: 300mW
• Voltage Rating: 75V
• No. Of Elements: 4
• Resistor Case Style: 0612
• Svhc: No SVHC
• Product Type: Arrays
• Dimensions: 3.2 mm W x 1.5 mm L x 0.45 mm H
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ACASA-10K/15K-ETR

www.vishay.com
280
ACAC 0612, ACAS 0612 - Precision
Vishay Beyschlag
PATTERN STYLES FOR CHIP RESISTOR ARRAYS
DESCRIPTION
The production of the components is strictly controlled and
follows an extensive set of instructions established for
reproducibility. A homogeneous film of metal alloy is
deposited on a high grade (96 % Al
using a mask to separate the adjacent resistors and
conditioned to achieve the desired temperature coefficient.
Specially designed inner contacts are realized on both sides.
A special laser is used to achieve the target value by
smoothly cutting a meander groove in the resistive layer
without damaging the ceramics.
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
The result of the determined production is verified by an
extensive
performed on 100 % of the individual chip resistors. Only
accepted products are laid directly into the paper tape in
accordance with IEC 60286-3
Notes
(1)
(2)
(3)
RECOMMENDED SOLDER PAD DIMENSIONS FOR CHIP RESISTOR ARRAYS
TYPE
ACAC 0612
ACAS 0612
Global Automotive Declarable Substance List, see
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
environmental policy group → chemicals → jig → Joint Industry Guide (JIG-101 Ed 2.0)
The quoted IEC standards are also released as EN standards with the same number and identical contents
testing
procedure
0.1
Z
(mm)
0.7
0.7
G
G
Y
(3)
.
X
and
I
ACAC 0612
2
Precision Thin Film Chip Resistor Array
For technical questions, contact:
O
3
(mm)
) ceramic substrate
0.7
0.7
optical
P
Y
www.gadsl.org
inspection
(mm)
0.64
0.5
X
[e-mail]
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using reflow or vapour phase as shown in
IEC 61760-1
soldering using wave can also be used. The encapsulation is
resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions.
The suitability of conformal coatings, if applied, shall be
qualified by appropriate means to ensure the long-term
stability of the whole system. The resistors are RoHS
compliant; the pure tin plating provides compatibility with
lead (Pb)-free and lead-containing soldering processes. The
permitted storage time is 20 years, whereas the solderability
is specified for 2 years after production or requalification. The
immunity of the plating against tin whisker growth has been
proven under extensive testing.
All
CEFIC-EECA-EICTA
hazardous substances. This includes full compliance with
the following directives:
• 2000/53/EC End of Vehicle life Directive (ELV) and
• 2002/95/EC Restriction of the use of Hazardous
• 2002/96/EC Waste Electrical and Electronic Equipment
TESTS
Where applicable, the resistors are tested in accordance with
EN 140401-801 which refers to EN 60115-1 and EN 140400.
Annex II (ELV II)
Substances directive (RoHS)
Directive (WEEE)
(mm)
0.5
products
U
ACAS 0612
-
P
U
(3)
. For ACAC resistor arrays automatic
I
comply
X
(mm)
2.1
2.1
Z
(2)
G
Y
with
0.1
list
Z
of
the
(mm)
0.3
0.3
www.eicta.org
Document Number: 28751
I
legal
GADSL
Dimensions in mm
Revision: 19-Nov-09
limits for solder resist
restrictions
(1)
→ policy →
(mm)
and
0.8
0.8
P
the
on