TCP0J475M8R Rohm Semiconductor, TCP0J475M8R Datasheet - Page 4

• Manufacturer Part Number: TCP0J475M8R
• Description: CAP TANT 4.7UF 6.3V 20% SMD
• Manufacturer: Rohm Semiconductor
• Series: TCr
• Type: Moldedr

Specifications of TCP0J475M8R

• Capacitance: 4.7µF
• Voltage - Rated: 6.3V
• Tolerance: ±20%
• Esr (equivalent Series Resistance): 11.80 Ohm
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 0805 (2012 Metric)
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height: 0.043" (1.10mm)
• Manufacturer Size Code: P
• Features: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Other names: 511-1443-2

○
TC Series P Case
c
www.rohm.com
Temperature
Stability
Surge voltage
Loading at
High temperature
Terminal
strength
2010 ROHM Co., Ltd. All rights reserved.
Item
Temp.
ΔC / C
Df (tan δ)
L.C.
Temp.
ΔC / C
Df (tan δ)
L.C.
Temp.
ΔC / C
Df (tan δ)
L.C.
Appearance
L.C.
ΔC / C
Df (tan δ)
Appearance
L.C.
ΔC / C
Df (tan δ)
Capacitance
Appearance
−55 °C
Within 0/−15% of initial value
Shall be satisfied the voltage on " Standard list "
+85 °C
Within +15/0% of initial value
Shall be satisfied the voltage on " Standard list "
Less than 1000% of initial limit
+125 °C
Within +20/0% of initial value
Shall be satisfied the voltage on " Standard list "
Less than 1250% of initial limit
There should be no significant abnormality.
Shall be satisfied the voltage on " Standard list "
TCP0G336M8R : Within ± 20% of initial value
TCP0J226M8R : Within ± 20% of initial value
Others : Within ± 10% of initial value
Less than 150% of initial limit
There should be no significant abnormality.
TCP0G336M8R : Less than 150% of initial limit
TCP0J226M8R : Less than 150% of initial limit
Others : Less than initial limit
TCP0G336M8R : Within ± 20% of initial value
TCP0J226M8R : Within ± 20% of initial value
Others : Within ± 10% of initial value
Less than 150% of initial limit
The measured value should be stable.
There should be no significant abnormality.
Performance
−
4/7
Test conditions (based on JIS C 5101−1 and JIS C 5101− 3)
As per 4.29 JIS C 5101-1
As per 4.13 JIS C 5101-3
As per 4.26JIS C 5101-1
As per 4.14JIS C 5101-3
Apply the specified surge voltage via the serial resistance of
1kΩ every 5±0.5 min.
for 30±5 s. each time in the atmospheric condition of 85±2°C.
Repeat this procedure 1,000 times.
After the specimens, leave it at room temperature for
over 24h and then measure the sample.
As per 4.23 JIS C 5101-1
As per 4.15 JIS C 5101-3
After applying the rated voltage for 1000+36/0 h without
discontinuation via the serial resistance of 3Ω or less
at a temperature of 85±2°C, leave the sample at room
temperature / humidity for over 24h and measure the value.
As per 4.35 JIS C 5101-1
As per 4.9 JIS C 5101-3
A force is applied to the terminal until it bends to 1mm and
by a prescribed tool maintain the condition for 5s.
(See the figure below)
thickness=1.6mm
50
45
R230
20
45
F (Apply force)
(Unit : mm)
1
2010.02 - Rev.E
Data Sheet