Q8P1CXXSB12 APEM Components, Q8P1CXXSB12 Datasheet - Page 3

• Manufacturer Part Number: Q8P1CXXSB12
• Description: LED INDICATOR
• Manufacturer: APEM Components

Specifications of Q8P1CXXSB12

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

STANDARD OPTIONS
The Q8 Series is available with a range of standard options, to specify your LED, simply choose one option from each column.
An example is shown below.
SERIES
Example Q8P8GXXY02E
Ø8mm, prominent bezel, short body solder
lug terminals, satin grey finish, fixed light,
yellow, 2volt DC LED, IP67 Panel Seal
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG, red wire denotes Anode (+), black wire denotes Cathode (-)
• For LEDs with alternate voltages consult APEM
• Bi-colour LEDs, by connecting the gold Faston (+) one colour is produced, by reversing the supply voltage another colour is
• Take care when soldering to the Faston terminals
• Short body pins and wires are only available up to 28VDC
• Short body Fastons are only available without integral resistor (2VDC)
• The Tri-colour LED has red and green LEDs when both are connected yellow is produced
• Standard Tri-colour Faston terminals are two Anodes (+) and one Cathode (-)
• Tri-colour wires are one red (+) and one green (+) Anode and one black (-) Cathode
• Tri-colour pins are centre (–) cathode, shortest (+) anode pin green, longest (+) anode pin red
• Tri-colours are only available up to 28VAC/DC and use 2.0mm solder lug/fastons
• Maximum panel thickness 7mm
• For behind panel epoxy sealed options please consult Apem
• We recommend using Superbright LEDs for use at 220VAC
• For resistorless versions (02) please pay attention to the forward voltage
Q
Q
for other wire lengths consult APEM
produced – Bi-colours are available up to 28VDC. [AC products not available]
MOUNTING
8 = Ø8mm
Q-SERIES 8mmØ Panel Mounting LED Indicator
HOLE
8
P = Prominent
R = Recessed
F = Flush
BEZEL
STYLE
P
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
6 = Short body
7 = Short body
8 = Short body
TERMINALS
Pins
Wires
Solder lug/
faston
8
C = Bright Chrome
B = Black Chrome
G = Satin Grey
BEZEL FINISH
Order Overview
G
www.apem.com
ILLUMINATION
XX = Fixed Light
KK = Flashing Light
(only up to 28VDC)
YY = Bi-colour
ZZ = Tri-colour
TYPE OF
XX
R = Red
G = Green
Y = Yellow
B = Blue
W = White
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
LED COLOUR
Y
02 = 2VDC
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
VOLTAGE
12
(Blank) = Unsealed
E = IP67
SEALING
E
6