EEE-HD1V330AP Panasonic - ECG, EEE-HD1V330AP Datasheet - Page 13

• Manufacturer Part Number: EEE-HD1V330AP
• Description: CAP 33UF 35V ELECT HD SMD
• Manufacturer: Panasonic - ECG
• Series: HDr

Specifications of EEE-HD1V330AP

• Capacitance: 33µF
• Voltage Rating: 35V
• Tolerance: ±20%
• Lifetime @ Temp.: 5000 Hrs @ 105°C
• Operating Temperature: -40°C ~ 105°C
• Features: General Purpose
• Ripple Current: 53mA
• Impedance: 2 Ohm
• Mounting Type: Surface Mount
• Package / Case: Radial, Can - SMD
• Size / Dimension: 0.315" Dia (8.00mm)
• Height: 0.244" (6.20mm)
• Surface Mount Land Size: 0.327" L x 0.327" W (8.30mm x 8.30mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Esr (equivalent Series Resistance): -
• Other names: EEEHD1V330AP; PCE4965TR

7．Performance Characteristics
No
1 Leakage Current ≦ I=0.01CV or 3μA whichever is the
2 Capacitance
3 Tangent of Loss Less than the part lists.
4 Charact- Step 2 Impedance Ratio:
5 Surge
6 Robustness of
Angle
(tanδ)
eristics at
High and
Low Tem- Step 4 Leakage Current:
perature
Termination
(Tensile)
Item
V type HD sereis
Panasonic Electronic Devices Co., Ltd.
Within the specified capacitance tolerance.
Capacitance Change:
Tangent of Loss Angle (tanδ):
Leakage Current:
Capacitance Change:
Tangent of Loss Angle (tanδ):
Appearance:
There is no damage or breakage after test.
I:Leakage current C:Capacitance
V:Rated voltage
Product Specification
≦500% of the value of item 7.1.
≦the value of item 7.3.
≦the value of item 7.1.
≦the value of item 7.3.
greater.
Less than the table 1 value of item 8
ratio against step 1.
Within ±25% of the value in step 1.
Within ±15% of initial measured value.
No significant change can be observed.
Performance Characteristics
(High. temp. Pb free reflow type)
Series Resistor : 1000Ω±10Ω
Applied Voltage : Rated voltage
Measuring
Measuring Frequency : 120Hz±20%
Measuring Circuit
Measuring Voltage : +1.5 V.DC ～ +2 V.DC
Measuring Frequency : 120Hz±20%
Measuring Circuit
Measuring Voltage : +1.5 V.DC ～ +2 V.DC
Impedance should be measured 120Hz±10％.
Test temperature : 15℃～35℃
Series Protective Resistance :
R: Protective resistance(kΩ)
Test voltage
Applied voltage 1000 cycles of 30s±5s
C: Capacitance(μF)
After fixing the capacitors, the terminals are
pulled in a vertical direction.
Load is gradually increased until it reached
the value specified below and held for 10
Step Test Temperature(℃)
seconds.
1
2
3
4
5
Pull Strength
Keep time
-25±3,-40±3
: Surge voltage item 6.5
: After 2 minutes
"ON"and 5 min 30 s"OFF".
20±2
20±2
20±2
105±2
: Equivalent series circuit
(≦0.5 V for A.C.)
: Equivalent series circuit
(≦0.5 V for A.C.)
Test
10s±1s
10N
CE-VHDA4-CE-0-2
R
10 min. ～ 15 min.
10 min. ～ 15 min.
=
1 0 0
30 min.
30 min.
Time
10
―
C
±
5 0