B76006V1579M025 Kemet, B76006V1579M025 Datasheet - Page 24

• Manufacturer Part Number: B76006V1579M025
• Description: CAP TANT 150UF 6.3V 20% POLY SMD
• Manufacturer: Kemet
• Series: B760r
• Type: Moldedr

Specifications of B76006V1579M025

• Capacitance: 150µF
• Voltage - Rated: 6.3V
• Tolerance: ±20%
• Esr (equivalent Series Resistance): 25.0 mOhm
• Operating Temperature: -55°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 2917 (7343 Metric)
• Size / Dimension: 0.287" L x 0.169" W (7.30mm x 4.30mm)
• Height: 0.075" (1.90mm)
• Manufacturer Size Code: V
• Features: Polymer
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Other names: 495-2300-2; T520V157M006ZTE025

Storage conditions
KEMET polymer capacitors are shipped in moisture barrier bags together with a desiccant and a
moisture indicator card.
All series (B760, B761, B763) are classified according JEDEC J-STD-020C as MSL 3 (Moisture
Sensitivity Level 3). Parts should be mounted 168 hours (= 7 days) after opening the moisture
barrier bags to prevent absorption of moisture and outgassing effects during soldering. Following
rules should be adhered to:
Environmental comments and warnings
As a manufacturer of passive components, we develop our products on the basis of the relevant
standards and laws, and thus ensure that our products are free of those materials and
substances prohibited by the relevant legislation.
To ensure a standardized procedure for KEMET worldwide, a binding list of materials and
substances is included in our environment management system to ISO 14001. Our planning and
development guidelines include regulations and directives aiming to promote recognition of
environmental aspects and to optimize products and processes in terms of material use and
environmental compatibility, to design them with a sparing use of resources and to replace
hazardous substances as far as possible.
The environmental officer provides support in assessing the environmental risks of a
development project upon request. Consideration of environmental aspects is checked and
recorded at the design reviews.
Please read Important notes and
Cautions and warnings at the end of this document.
Polymer chip capacitors
Basic
Parts must be stored in the reel and sealed moisture barrier bag until usage.
Parts should not be stored at high temperature, high humidity, corrosive atmospheres and
exposed to direct sun light. To enable the floor life of 168 hours according JEDEC J-STD-033A
a maximum temperature of 30 C at a humidity of maximum 60% R.H. is required.
Temperature fluctuation should be minimized.
Page 24 of 27
B760