LLA219R71C104MA01L Murata Electronics North America, LLA219R71C104MA01L Datasheet - Page 2

• Manufacturer Part Number: LLA219R71C104MA01L
• Description: CAP CER .1UF 16V X7R 0805
• Manufacturer: Murata Electronics North America
• Series: LLAr

Specifications of LLA219R71C104MA01L

• Capacitance: 0.1µF
• Voltage - Rated: 16V
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESL, Multi-Terminal
• Applications: General Purpose
• Package / Case: 0805 (2012 Metric)
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Thickness: 0.85mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Other names: 490-4414-2

!Note
No.
14
15
16
17
LLL/LLA/LLM Series Specifications and Test Methods (1)
Continued from the preceding page.
Temperature
Cycle
Humidity
(Steady
Humidity
Load
High
Temperature
Load
State)
1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
0.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0.
Please check with our sales representatives or product engineers before ordering.
specifications before ordering.
Item
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Dielectric
Strength
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Appearance No marking defects
Capacitance
Change
D.F.
I.R.
Within 7.5%
W.V.: 25V min.; 0.025 max.
W.V.: 16V/10V max.; 0.035 max.
W.V.: 6.3V max.; 0.05 max.
More than 10,000M or 500 · F (Whichever is smaller)
No failure
Within 12.5%
W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
More than 1,000M or 50 · F (Whichever is smaller)
Within 12.5%
W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
More than 500M or 25 · F
(Whichever is smaller)
Within 12.5%
W.V.: 10V min.; 0.05 max.
W.V.: 6.3V max.; 0.075 max.
More than 1,000M or 50 · F
(Whichever is smaller)
Specifications
Fix the capacitor to the supporting jig in the same manner and
under the same conditions as (10).
Perform the five cycles according to the four heat treatments
listed in the following table. Let sit for 24 2 hours at room
temperature, then measure.
• Initial measurement.
Sit the capacitor at 40 2 C and 90 to 95% humidity for 500 12
hours. Remove and let sit for 24 2 hours at room temperature,
then measure.
Apply the rated voltage at 40 2 C and 90 to 95% humidity for
500 12 hours. Remove and let sit for 24 2 hours at room
temperature, then measure. The charge/discharge current is
less than 50mA.
Apply 200% of the rated voltage for 1000 12 hours at the
maximum operating temperature 3 C. Let sit for 24 2 hours
at room temperature, then measure. The charge/discharge
current is less than 50mA.
•Initial measurement.
Perform a heat treatment at 150
let sit for 24 2 hours at room temperature. Perform the initial
measurement.
Apply 200% of the rated DC voltage for one hour at the
maximum operating temperature 3 C. Remove and let sit for
24 2 hours at room temperature.
Perform initial measurement.
Temp. ( C)
Time (min.)
Step
Min. Operating
Temp.
30 3
1
+0
–3
Test Method
Temp.
Room
2 to 3
2
+0
–10
C for one hour and then
Max. Operating
Temp.
30 3
3
+3
–0
Temp.
Room
2 to 3
4