HE3C243M050BZSS Vishay, HE3C243M050BZSS Datasheet - Page 3

• Manufacturer Part Number: HE3C243M050BZSS
• Description: CAP WET TANT 24000UF 20% 50V RAD
• Manufacturer: Vishay
• Series: HE3r
• Type: Hermetically Sealedr

Specifications of HE3C243M050BZSS

• Capacitance: 24000µF
• Voltage - Rated: 50V
• Tolerance: ±20%
• Esr (equivalent Series Resistance): 35.0 mOhm
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Through Hole
• Package / Case: Radial
• Size / Dimension: 1.400" Dia (35.56mm)
• Height: 0.614" (15.60mm)
• Lead Spacing: 0.402" (10.20mm)
• Manufacturer Size Code: C
• Features: Wet Tantalum
• Lifetime @ Temp.: 1000 Hrs @ 85°C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 718-1679

HE3
Vishay
PERFORMANCE CHARACTERISTICS OF HIGH ENERGY CAPACITORS
www.vishay.com
102
ELECTRICAL PERFORMANCE CHARACTERISTICS
ITEM
Operating Temperature Range
Capacitor Tolerance
ESR
DC Leakage Current (DCL max.)
Reverse Voltage
Surge Voltage
Life Test at + 85 °C
ENVIRONMENTAL CHARACTERISTICS
ITEM
Hermeticity
Moisture Resistance
Altitude
MECHANICAL PERFORMANCE CHARACTERISTICS
ITEM
Thermal Shock
Shock
Vibration - High
Frequency
Vibration - Random
Resistance to Solder
Heat
Solderability
Terminal Strength
Part Markings
Weight (Mass)
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum
TEST AND CONDITIONS
MIL-STD-202, Method 112
C/IIIa
MIL-STD-202, Method 106
MIL-STD-202, Method 105 C,
Test Condition D
TEST AND CONDITIONS
MIL-STD-202, Method 107 G
MIL-STD-202, Method 213 B
Test Condition G
MIL-STD-202, Method 204 D
Test Condition D
MIL-STD-202, Method 214 A
Test Condition I, Letter D
MIL-STD-202, Method 210 F
ANSI J-STD-002
MIL-STD-202, Method 211 A
MIL-STD-202, Method 215 J
Hermetic Seal for - 55 °C to + 125 °C Operation
For technical questions, contact:
PERFORMANCE CHARACTERISTICS
1000 h at + 85 °C
- 55 °C to + 85 °C (to + 125 °C with voltage derating)
Limits per Standard Ratings Table
At 25 °C the leakage current shall not exceed values listed in the Standard Rating table.
No continuous reverse voltage permitted
and one half (1.5) min charge and a four and one half (4.5) min discharge through 100 
resistor.
± 20 % ± 10 % at 120 Hz
The test shall be at 1000 cycles at 110 % of rated voltage at 85 °C. A cycle consists of a one
COMMENTS
11 ms, 50 g
12 sweeps/axis, 20 g peak
1.5 h/axis, 12 g
The capacitor must withstand solder dipping of the terminals at 260 °C
for 10 s. The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
The capacitor terminals must withstand a 5 pound pull test for 5 s to 10 s.
The capacitor must not be visibly damaged and the electrical
characteristics must not be affected.
The capacitor shall be permanently and legibly marked on the
circumference of the case. The markings shall be resistant to solvents.
See dimensions table, page 101
COMMENTS
The capacitor shall be hermetically sealed such that the case does not
leak electrolyte or vent any gas when exposed to a vacuum.
100 000 feet test
[e-mail]
Document Number: 42089
Revision: 10-Mar-11