C5750X7R1H106K TDK Corporation, C5750X7R1H106K Datasheet - Page 58

• Manufacturer Part Number: C5750X7R1H106K
• Description: CAP CER 10UF 50V X7R 10% 2220
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C5750X7R1H106K

• Capacitance: 10µF
• Voltage - Rated: 50V
• Tolerance: ±10%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESR
• Applications: General Purpose
• Package / Case: 2220 (5750 Metric)
• Size / Dimension: 0.224" L x 0.197" W (5.70mm x 5.00mm)
• Thickness: 2.30mm
• Dielectric Characteristic: X7R
• Capacitance Tolerance: ± 10%
• Voltage Rating: 50VDC
• Capacitor Case Style: 2220
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Tolerance (+ Or -): 10%
• Voltage: 50VDC
• Temp Coeff (dielectric): X7R
• Operating Temp Range: -55C to 125C
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Case Style: Ceramic Chip
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 5.7mm
• Product Depth (mm): 5mm
• Product Height (mm): 2.3mm
• Product Diameter (mm): Not Requiredmm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 445-3492-2; C5750X7R1H106KT

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — General Application // Version A11
No.
17
*As for the initial measurement of capacitors (Class2) on number 8,12,13,14 and 15, leave capacitor at 150 —10, 0°C for 1
hour and measure the value after leaving capacitor for 24±2h in ambient conditions.
General
Specifications
Item
Life
External
appearance
Capacitance
Q
(Class 1)
D.F.
(Class 2)
Insulation
Resistance
Performance
No mechanical damage.
* Inside ( ) is applied to Y5V 6.3V
product.
Characteristics
X5R: 200% of initial spec. max.
X7R: 200% of initial spec. max
Y5V: 150% of initial spec. max
1,000MΩ or 50MΩ•μF min. ,
whichever smaller.
(As for the capacitors of rated voltage
16, 10 and 6.3V DC, 1,000 MΩ or
10MΩ•μF min.,)
Rated
Capacitance
C ≥ 30pF
10pF ≤ C < 30pF
C < 10pF
Characteristics
Class 1
Class 2
C0G
X5R
X7R
Y5V
C : Rated capacitance (pF)
Change from the
value before test
±3% or ±0.3pF,
whichever larger.
± 25 %
± 25 %
± 30 %
Q
350 min.
275+5/2×C min.
200+10×C min.
*(± 40 %)
C Series — General Application
Test or Inspection Method
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply voltage at 125±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2) Voltage treat the
capacitor under testing temperature and voltage for 1
hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.