UMK316B7224ML-T Taiyo Yuden, UMK316B7224ML-T Datasheet - Page 18

• Manufacturer Part Number: UMK316B7224ML-T
• Description: CAP CERM .22UF 50V X7R 1206
• Manufacturer: Taiyo Yuden
• Series: UMKr

Specifications of UMK316B7224ML-T

• Capacitance: 0.22µF
• Voltage - Rated: 50V
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Applications: General Purpose
• Package / Case: 1206 (3216 Metric)
• Size / Dimension: 0.126" L x 0.063" W (3.20mm x 1.60mm)
• Thickness: 1.60mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Ratings: -
• Lead Spacing: -
• Other names: 587-2260-2; CE UMK316 B7224ML-T; UMK316B7224ML-T; UMK316BJ224ML-T; UMK316BJ224ML-T

Note 1
Note 2
Note 3
Note 4, 5 :The figure indicates typical inspection. Please refer to individual specifications.
Note 6
Multilayer Ceramic Capacitor Chips
Note on standard condition: "standard condition" referred to herein is defined as follows: 5 to 35℃ of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure.
When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative
humidity, and 86 to 106kPa of air pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
△
16.Loading under Damp Heat
17.Loading at High Tempera-
！
RELIABILITY DATA
当社カタログをご使用の際には 「当社製品に関するお断り」 を必ずお読みください。
ture
:For 105 type, specified in "High value".
:Thermal treatment （Multilayer） : 1 hr of thermal treatment at 150 ＋0 /−10 ℃ followed by 24±2 hrs of recovery under the standard condition shall be performed before the measurement.
:Voltage treatment （Multilayer） : 1 hr of voltage treatment under the specified temperature and voltage for testing followed by 24±2 hrs of recovery under the standard condition shall be performed before the measurement.
:Some of the parts are applicable in rated voltage×1.5. Please refer to individual specifications.
Item
Appearance: No ab-
normality
Capacitance change:
Within ± 7.5% or ±
0.75pF, whichever is
larger.
Q: C≧30 pF: Q≧200
C＜30 pF: Q≧100 ＋
10C/3
C ： Nominal capaci-
tance
Insulation resistance:
500 MΩ min.
Appearance: No ab-
normality
Capacitance change:
Within ±3% or
±0.3pF, whichever is
larger.
Q: C≧30 pF : Q≧350
10≦C＜30 pF: Q≧275
＋ 2.5C
C＜10 pF: Q≧200 ＋
10C
C： Nominal
capacitance
Insulation resistance:
1000 MΩ min.
Temperature Compensating （Class 1）
Standard
Appearance: No ab-
normality
Capacitance change:
C≦2 pF: Within ±0.4 pF
C＞2 pF: Within ±0.75
pF
C ： Nominal capaci-
tance
Insulation resistance:
500 MΩ min.
Appearance: No ab-
normality
Capacitance change:
Within ±3% or ±
0.3pF, whichever is
larger.
Insulation resistance:
1000 MΩ min.
High Frequency Type
Specified Value
50 MΩμF or 1000 MΩ,
whichever is smaller.
Appearance: No ab-
normality
Capacitance change:
BJ: Within ±12.5%
F: Within ±30%
tan δ: BJ: 5.0% max.
Insulation resistance:
25 MΩμF or 500 MΩ,
whichever is the smaller.
Appearance: No ab-
normality
Capacitance change:
BJ: Within ±12.5%
F: Within ±30%
tan δ:
BJ: 4.0% max.
F: 7.5% max.
Insulation resistance:
Standard Note1
F: 7.5% max.
High Permittivity （Class 2）
Note 5
Note 4
Note 4
Note 5
Note 4
Note 4
Appearance: No ab-
normality
Capacitance change:
BJ：Within±12.5％
Note 4
tanδ：
Insulation resistance:
25 MΩμF or 500 MΩ,
whichever is the smaller.
Appearance: No abnormality
Capacitance change:
BJ：Within±12.5％
F：Within±30％
tanδ：
Insulation resistance:
50 MΩμF or 1000 MΩ,
whichever is smaller.
Note 5
F：Within±30％
BJ：5.0％max.
F：11％max.
BJ：5.0％max.
F：11％max.
Within±20％※※
Within±25％※※
High Value
△
Note 4
Note 5
Note 4
Note 4
！
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
According to JIS C 5102 Clause 9. 9.
Multilayer:
Preconditioning: Voltage treatment （Class 2）
Temperature: 40±2℃
Humidity: 90 to 95% RH
Charge and discharge current: 50mA max. （Class 1,2）
Recovery: Recovery for the following period under the standard
Temperature: 60±2℃
Humidity: 90 to 95% RH
Duration: 500
Charge and discharge current: 50mA max.
Recovery: 6∼24 hrs of recovery under the standard
According to JIS C 5102 clause 9.10.
Multilayer:
Preconditioning: Voltage treatment （Class 2）
Temperature:125±3℃（Class 1, Class 2: B, BJ （X7R） ）
Duration: 1000
Applied voltage: Rated voltage×2
Recovery: Recovery for the following period under the
standard condition after the removal from test chamber.
24±2 hrs （Class 2）
HighーFrequency Multilayer:
Temperature: 125±3℃ （Class 1）
Duration: 1000
Applied voltage: Rated voltage×2
Recovery: 6∼24 hrs of recovery under the standard
Duration: 500
Applied voltage: Rated voltage
HighーFrequency Multilayer:
Applied voltage: Rated voltage
6∼24 hrs （Class 1）
condition after the removal from test chamber.
condition after the removal from test chamber.
condition after the removal from test chamber.
6∼24 hrs （Class 1）
24±2 hrs （Class 2）
85±2℃ （Class 2: BJ,F）
＋24
−
＋48
−
Test Methods and Remarks
＋24
−
＋48
−
0
0
0
0
hrs
hrs
hrs
hrs
Note 6
3/3
107
4