C1608X7R1E154K TDK Corporation, C1608X7R1E154K Datasheet - Page 58

• Manufacturer Part Number: C1608X7R1E154K
• Description: CAP CER .15UF 25V X7R 0603
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C1608X7R1E154K

• Capacitance: 0.15µF
• Tolerance: ±10%
• Package / Case: 0603 (1608 Metric)
• Voltage - Rated: 25V
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESR
• Applications: General Purpose
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Thickness: 0.80mm
• Voltage Rating: 25 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Temperature Coefficient / Code: X7R
• Product: General Type MLCCs
• Dimensions: 0.8 mm W x 1.6 mm L
• Termination Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: C1608X7R1E154K; Q3672347

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — General Application // Version A11
No.
17
*As for the initial measurement of capacitors (Class2) on number 8,12,13,14 and 15, leave capacitor at 150 —10, 0°C for 1
hour and measure the value after leaving capacitor for 24±2h in ambient conditions.
General
Specifications
Item
Life
External
appearance
Capacitance
Q
(Class 1)
D.F.
(Class 2)
Insulation
Resistance
Performance
No mechanical damage.
* Inside ( ) is applied to Y5V 6.3V
product.
Characteristics
X5R: 200% of initial spec. max.
X7R: 200% of initial spec. max
Y5V: 150% of initial spec. max
1,000MΩ or 50MΩ•μF min. ,
whichever smaller.
(As for the capacitors of rated voltage
16, 10 and 6.3V DC, 1,000 MΩ or
10MΩ•μF min.,)
Rated
Capacitance
C ≥ 30pF
10pF ≤ C < 30pF
C < 10pF
Characteristics
Class 1
Class 2
C0G
X5R
X7R
Y5V
C : Rated capacitance (pF)
Change from the
value before test
±3% or ±0.3pF,
whichever larger.
± 25 %
± 25 %
± 30 %
Q
350 min.
275+5/2×C min.
200+10×C min.
*(± 40 %)
C Series — General Application
Test or Inspection Method
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply voltage at 125±2ºC for 1,000 +48, 0h.
Applied voltage is 1xRV. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for class 2) Voltage treat the
capacitor under testing temperature and voltage for 1
hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.