71918-126LF FCI, 71918-126LF Datasheet - Page 18

• Manufacturer Part Number: 71918-126LF
• Description: CONN HEADER 26POS DUAL VERT PCB
• Manufacturer: FCI
• Series: Quickie™, Basics+r
• Type: PCB Plugr

Specifications of 71918-126LF

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 26
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Contact Mating Length: 0.228" (5.80mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks
• Contact Finish: Gold, GXT™
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Gray
• Agency Approvals: CSA, UL
• Angle: Straight
• Brand/series: Quickie®
• Contact Plating: Gold/GXT™
• Current, Rating: 3 A
• Flammability Rating: UL94V-0
• Length, Overall: 85.34 mm
• Length, Pin: 0.114 "
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Hole Size: 1.02, 2.8 "
• Number Of Contacts: 26
• Pin Spacing: 2.54 mm
• Special Features: Eject Latch
• Temperature, Operating: -65 to +125 °C
• Voltage, Rating: 1500 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 609-1756

TITLE
Quickie™ Connector System
Copyright
Form E-3334
Rev E
4.5
FCI
4.4.5
Acceptance Inspection
Acceptance inspection shall consist of the examinations and inspections specified in Table VI.
4.5.1
4.5.2
4.5.3
4.5.4
Disposition of Sample Units. Sample units that have been subjected to the quality
conformance inspection shall not be considered deliverable on the contract or purchase
order.
Examination
Visual & Mechanical
Inspection Lot. An inspection lot shall consist of all connectors produced under essentially
the same conditions and offered for inspection at one time.
Sampling Plan. Statistical sampling and inspection shall be in accordance with MIL-STD-
105 for General Inspection, Level II. The acceptable quality level (AQL) shall be as
specified in Table VI. Major and minor defects shall be as defined in MIL-STD-105.
Rejected Lots. Rejected lots shall be reworked to correct the defects or screened to
remove defective units and re-submitted for inspection.
Disposition of Sample Units. Sample units that have been subjected to the acceptance
inspection shall be considered deliverable on the contract or purchase order.
TYPE
TABLE VI - ACCEPTANCE INSPECTION
PRODUCT SPECIFICATION
PDM: Rev:F
Major
1.0%
AQL
STATUS:
NUMBER
PAGE
AUTHORIZED BY
CLASSIFICATION
Minor
4.0%
M.Barrios
18 of 20
Released
BUS-12-082
UNRESTRICTED
Printed: Apr 13, 2007
REVISION
DATE
31 Jul 06
F
GS-01-001
.