71918-126LF FCI, 71918-126LF Datasheet - Page 9

• Manufacturer Part Number: 71918-126LF
• Description: CONN HEADER 26POS DUAL VERT PCB
• Manufacturer: FCI
• Series: Quickie™, Basics+r
• Type: PCB Plugr

Specifications of 71918-126LF

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 26
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Contact Mating Length: 0.228" (5.80mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks
• Contact Finish: Gold, GXT™
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Gray
• Agency Approvals: CSA, UL
• Angle: Straight
• Brand/series: Quickie®
• Contact Plating: Gold/GXT™
• Current, Rating: 3 A
• Flammability Rating: UL94V-0
• Length, Overall: 85.34 mm
• Length, Pin: 0.114 "
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Hole Size: 1.02, 2.8 "
• Number Of Contacts: 26
• Pin Spacing: 2.54 mm
• Special Features: Eject Latch
• Temperature, Operating: -65 to +125 °C
• Voltage, Rating: 1500 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 609-1756

TITLE
Quickie™ Connector System
Copyright
Form E-3334
Rev E
3.6
FCI
3.5.5
Mechanical Characteristics
3.6.1
3.6.2
3.6.3
Dielectric Withstanding Voltage. There shall be no evidence of arc-over, insulation
breakdown, or excessive leakage current (> 1 milliampere) when the mated connectors
are tested in accordance with MIL-STD-202, Method 301. The following details shall
apply:
(a) Test Potential - 1,000 volts RMS, 60 Hz at sea-level pressure 450 volts RMS, 60 Hz at
(b) Test Duration - 60 seconds
(c) Special Preparation* - the header and receptacle shall not be terminated.
(d) Points of Measurement - between adjacent contact positions.
Cable Retention. The strain relief on the receptacle shall withstand an evenly distributed
force of 10 pounds per-inch-of-cable-width (.146 Newtons per-millimeter-of-cable-width)
applied to the cable in a direction parallel to the contact axis.
Cable Flex Resistance**. With strain relief installed, the receptacle shall withstand 100
cycles of cable flexing. The following details shall apply:
(a) Tension on Cable - 2 pounds per-inch-of-cable-width (0.029 Newtons per-millimeter-
(b) Flex Angle - 140 o as shown in Figure 3.
* The layout of land areas on printed wiring boards and the proximity of adjacent
conductors at the cut end of flexible cables can affect this characteristic and, therefore,
are necessarily excluded in its specification.
** Stranded wire only; solid conductors will not withstand flexing, whether or not a
connector is installed.
Total Mating Force. The total force to mate the header and receptacle shall not exceed
the values shown in Table I.
50,000 feet simulated altitude.
of-cable width)
TYPE
PRODUCT SPECIFICATION
PDM: Rev:F
STATUS:
NUMBER
PAGE
AUTHORIZED BY
CLASSIFICATION
M.Barrios
9 of 20
Released
BUS-12-082
UNRESTRICTED
Printed: Apr 13, 2007
REVISION
DATE
31 Jul 06
F
GS-01-001
.