PE-0805CM330JTT PULSE ELECTRONICS CORPORATION, PE-0805CM330JTT Datasheet - Page 6

• Manufacturer Part Number: PE-0805CM330JTT
• Description: INDUCTOR WW RF 33NH 500MA 0805
• Manufacturer: PULSE ELECTRONICS CORPORATION
• Series: 0805CMr
• Type: Ceramicr

Specifications of PE-0805CM330JTT

• Inductance: 33nH
• Current: 500mA
• Tolerance: ±5%
• Dc Resistance (dcr): 180 mOhm Max
• Q @ Freq: 58 @ 500MHz
• Self Resonant Freq: 1.8GHz
• Package / Case: 0805 (2012 Metric)
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 125°C
• Frequency - Test: 250MHz
• Material - Core: Ceramic
• Applications: General Purpose
• Maximum Dc Current: 500 mAmps
• Maximum Dc Resistance: 0.18 Ohms
• Self Resonant Frequency: 1800 MHz
• Q Minimum: 58
• Termination Style: SMD/SMT
• Dimensions: 1.68 mm W x 2.29 mm L x 1.450 mm H
• Shielding: Unshielded
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Shielding: -
• Current - Saturation: -
• Current - Temperature Rise: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 553-1037-2; PE0805CM330JTT

WIRE-WOUND
RF CHIP INDUCTORS
Performance Specifications
www.pulseeng.com
USA 858 674 8100
Heat Resistance Profile
Storage and Operating
Recommended Solder
Temperature Range:
Moisture Resistance
Temperature Range:
Thermal Shock:
Operating Life
-40 to +125°C
-40 to +85°C
• •
Germany 49 7032 7806 0
• •
Singapore 65 6287 8998
Inductors are subjected to 30 cycles
10 cycles of 24 hours at 70°C with
for 30 minutes at each extreme.
Inductors are subjected to the
Inductors are subjected to the
1000 hours at 85°C with 85%
following: Use a solder pot at
260°C, with RMA Flux. Each
90 to 95% Relative Humidity
Environmental Testing
termination is immersed in
Inductors are subjected to
Inductors are subjected to
63Sn/37Pb molten solder
the rated current applied
extremes for 48 hours.
Mechanical Testing
Relative Humidity with
Then tested at 25°C
Then tested at 25°C
Then tested at 25°C
for 4 to 6 seconds.
• •
4
Shanghai 86 21 62787060
• •
China 86 755 33966678
There shall be no deformation
There shall be no deformation
There shall be no Damaged,
Inductance shall not change
Inductance shall not change
Open or Shorted Windings
Q values shall not change
Q values shall not change
or change in appearance
or change in appearance
by more than ±10%
by more than ±10%
by more than ±5%
by more than ±5%
• •
Taiwan 886 3 4356768
WC701.L (4/10)