PIC16F630-I/ST Microchip Technology, PIC16F630-I/ST Datasheet - Page 51

• Manufacturer Part Number: PIC16F630-I/ST
• Description: IC MCU FLASH 1KX14 EEPROM14TSSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F630-I/ST

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 12
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 64 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 14-TSSOP
• Controller Family/series: PIC16F
• No. Of I/o's: 12
• Eeprom Memory Size: 128Byte
• Ram Memory Size: 64Byte
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 64 B
• Interface Type: RS- 232, USB
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 1 x 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014, DM164120-4
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

8.0
The EEPROM data memory is readable and writable
during normal operation (full V
is not directly mapped in the register file space.
Instead, it is indirectly addressed through the Special
Function Registers. There are four SFRs used to read
and write this memory:
• EECON1
• EECON2 (not a physically implemented register)
• EEDATA
• EEADR
EEDATA holds the 8-bit data for read/write, and
EEADR holds the address of the EEPROM location
being accessed. PIC16F630/676 devices have 128
bytes of data EEPROM with an address range from 0h
to 7Fh.
REGISTER 8-1:
REGISTER 8-2:
 2010 Microchip Technology Inc.
DATA EEPROM MEMORY
bit 7-0
bit 7
bit 6-0
EEDAT — EEPROM DATA REGISTER (ADDRESS: 9Ah)
EEADR — EEPROM ADDRESS REGISTER (ADDRESS: 9Bh)
bit 7
EEDATn: Byte value to write to or read from data EEPROM
bit 7
Unimplemented: Should be set to ‘0’
EEADR: Specifies one of 128 locations for EEPROM Read/Write Operation
Legend:
R = Readable bit
- n = Value at POR
Legend:
R = Readable bit
- n = Value at POR
EEDAT7
R/W-0
U-0
—
DD
range). This memory
EEDAT6
EADR6
R/W-0
R/W-0
EEDAT5
EADR5
R/W-0
R/W-0
W = Writable bit
’1’ = Bit is set
W = Writable bit
’1’ = Bit is set
EEDAT4
EADR4
R/W-0
R/W-0
The EEPROM data memory allows byte read and write.
A byte write automatically erases the location and
writes the new data (erase before write). The EEPROM
data memory is rated for high erase/write cycles. The
write time is controlled by an on-chip timer. The write
time will vary with voltage and temperature as well as
from chip to chip. Please refer to AC Specifications for
exact limits.
When the data memory is code-protected, the CPU
may continue to read and write the data EEPROM
memory. The device programmer can no longer access
this memory.
Additional information on the data EEPROM is
available in the PIC
(DS33023).
EEDAT3
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
EADR3
R/W-0
R/W-0
PIC16F630/676
®
EEDAT2 EEDAT1
Mid-Range Reference Manual,
EADR2
R/W-0
R/W-0
x = Bit is unknown
x = Bit is unknown
EADR1
R/W-0
R/W-0
DS40039F-page 51
EEDAT0
EADR0
R/W-0
R/W-0
bit 0
bit 0