PIC18F13K50-I/SS Microchip Technology, PIC18F13K50-I/SS Datasheet - Page 81

• Manufacturer Part Number: PIC18F13K50-I/SS
• Description: IC PIC MCU FLASH 8KB 20-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F13K50-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 8KB (4K x 16)
• Package / Case: 20-SSOP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 14
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: EUSART, I2C, MSSP, SPI, USB
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM164127, DV164126
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• Package: 20SSOP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 48 MHz
• Operating Supply Voltage: 3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164126 - KIT DEVELOPMENT USB W/PICKIT 2DM164127 - KIT DEVELOPMENT USB 18F14/13K50AC164112 - VOLTAGE LIMITER MPLAB ICD2 VPPXLT20SS-1 - SOCKET TRANSITION 18DIP 20SSOPAC164307 - MODULE SKT FOR PM3 28SSOP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

8.0
The
PIC18LF1XK50 devices due to an internal Low
Dropout (LDO) voltage regulator. The PIC18F1XK50
contain an internal LDO, while the PIC18LF1XK50 do
not.
The lithography of the die allows a maximum operating
voltage of the nominal 3.6V on the internal digital logic.
In order to continue to support 5.0V designs, a LDO
voltage regulator is integrated on the die. The LDO
voltage regulator allows for the internal digital logic to
operate at 3.3V, while I/O’s operate at 5.0V (V
The LDO voltage regulator requires an external bypass
capacitor for stability. The V
an external bypass capacitor. It is recommended that
the capacitor be a ceramic cap between 0.22 to 0.47 µF.
On power-up, the external capacitor will look like a
large load on the LDO voltage regulator. To prevent
erroneous operation, the device is held in Reset while
a constant current source charges the external
capacitor. After the cap is fully charged, the device is
released from Reset. For more information, refer to
Section 27.0 “Electrical
 2010 Microchip Technology Inc.
PIC18F1XK50
LOW DROPOUT (LDO)
VOLTAGE REGULATOR
devices
Specifications”.
USB
pin is required to have
differ
PIC18F1XK50/PIC18LF1XK50
from
DD
).
Preliminary
the
DS41350E-page 81